- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Have you recently installed a stereo ? Also, have you checked the fuses ? And or if a raw wire may have touched the fuses that control windows and dash lights ? Start there and get back to me
the cruise control has an ECU(electrocic control unit) which enables the car to keep moving considering the load and speed and slops too...so i don't think it should get disturbed by the stereo..
but anyway if it was doing so then you did gud.
while your buzzer doesn't work then get the electrical circuits checked and also check if while taking out stereo the sockets were loosened.. :)
Most factory stereos are wired to the dash dimmer switch. Usually if the dash lights go out after an after market stereo installation, it is because the wire that originally went to the factory stereo is not used for after market stereos. Double check the fuses and ensure the wire that controlled the lights on the factory stereo is not grounding out on something.
remove screws from dash face, remove dash face. two 10mm bolts hold stereo in place,remove bolts, gently pull stereo out. unplug stereo. install new stereo by reversing the directions
Same **** happened to me today but in a Mazda Ute.
If you havn't already....
- Check for burnt fuses.
- Check for any short Circuits.
That's all i can think of and I've done those but still have the same problem.
power window schematic
98 jetta dash light went out came on hours later then went out for good
×