Question about 1995 Honda Accord

2 Answers

I want to know how to fix the alignment on my 1995 honda accord ex.

Posted by Anonymous on

Ad

2 Answers

abereowo olalekan

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 65 Answers

Before making wheel alignment adjustment, perform the following checks:

  1. Tires should be equal in size and runout must not be excessive. Tires and wheels should be in balance, and inflated to manufacturer's specifications.

  2. Wheel bearings must be properly adjusted. Steering linkage and suspension must not have excessive looseness. Check for wear in tie rod ends and ball joints.
  3. Steering gear box must not have excessive play. Check and adjust to manufacturer's specifications.
  4. Vehicle must be at curb height with full fuel load and spare tire in vehicle. No extra load should be on vehicle.
  5. Vehicle must be level with floor and with suspension settled. Jounce front and rear of vehicle several times and allow it to settle to normal curb height.
  6. If steering wheel is not centered with front wheels in straight-ahead position, correct by shortening one tie rod adjusting sleeve and lengthening opposite sleeve equal amounts.
  7. Ensure wheel lug nuts are tightened to torque specifications
Ride Height Adjustment

Before adjusting alignment, check riding height. Riding height must be checked with vehicle on level floor and tires properly inflated. Passenger and luggage compartments must be unloaded. Bounce vehicle several times, and allow suspension to settle. Visually inspect vehicle from front to rear and from side to side for signs of abnormal height.
Measure riding height. See figure. Riding height between left and right sides of vehicle should vary less than 1′ (25.4 mm). If riding height is not within specification, check suspension components and repair or replace them as necessary.
Wheel Alignment Procedures

Honda recommends using commercially available computerized 4-wheel alignment equipment. Follow equipment manufacturer instructions to obtain vehicle alignment settings. Use following procedures for necessary adjustments.
Civic Camber Adjustment
Compare camber settings with vehicle manufacturer recommendations. If camber is incorrect, check for bent or damaged front suspension components. Replace faulty components. Recheck camber.
Civic Caster Adjustment
DO NOT use more than 2 shims. If more than 2 shims are required to adjust caster angle, check for bent or damaged suspension components.
Compare caster settings with vehicle manufacturer recommendations. If caster is incorrect, check for bent or damaged front suspension components. Replace faulty components. Recheck caster.
Civic Toe-In Adjustment

  1. Secure steering wheel in straight-ahead position. Measure front wheel toe-in. If adjustment is needed, loosen tie rod lock nuts. Turn both tie rods equally in the same direction until front wheels are in straight-ahead position and toe-in reading is correct. Tighten tie rod lock nuts. Reposition tie rod boots if twisted.
  2. Ensure parking brake is released. Check rear wheel toe-in. If adjustment is needed, hold adjusting bolt on rear compensator arm and loosen lock nut. See figure. Adjust rear toe-in by sliding rear control arm until rear toe-in is correct. Install NEW lock nut, and tighten it while holding adjusting bolt.
Wheel Alignment Specifications

  • Camber - Measurement in degrees.
    • Front: 0 (range -1 to 1)
    • Rear: 0.33 (range -1.33 to 0.67)
  • Caster - Measurement in degrees.
    • 1.17 (range 0.17 to 2.17)
  • Toe-In - Measurement in inches (mm).
    • Front: -0 (0)
    • Rear: 0.08 (2.0)
  • Toe-In - Measurement in degrees.
    • Front: 0.00 (range - 0.16 to 0.16)
  • Toe-Out On Turns - Measurement in degrees.
    • Inner: 41.00
    • Outer: 33.50
Torque Specifications Ft. Lbs (N.m)

  • Rear Control Arm Adjusting Bolt: 48 (65)
  • Spindle Nut: 136 (185)
  • Tie Rod Lock Nut: 41 (55)
  • Wheel Lug Nuts: 80 (108)
hope this helps you out.

Posted on May 09, 2011

Ad

pumba842

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    New Friend:

    An expert that has 1 follower.

  • Expert
  • 130 Answers

This is something you should take to your local alignment shop and have them do, they have specialized equipment to do this.

Posted on May 09, 2011

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What's is the spark plug gap for a 1995 Honda accord ex vtec


spark plug gap for a 1995 Honda accord David, .039 to .043 inches or 1.1 mm, for your spark plug gap on your Honda.

Mar 28, 2016 | Honda Cars & Trucks

2 Answers

Need wiring diagram for 1992 honda accord lx to trace


I need honda accord lx wiring diagram for free

Feb 09, 2012 | 1992 Honda Accord

1 Answer

Wandering where the alternator is located in a Honda Accord Ex 1995 4 cyl Manuel


Alternator mounting on 1994-95 Accords



c17hydro_17.gif


c17hydro_18.gif
Right next to where the word "stopper" is.

Nov 13, 2010 | 1995 Honda Accord

1 Answer

Honda accord 1997 EX V6. Wherre is The Speed


stand infront of your car, open hood and look at transmission assembly, Vss is neardown the throttle body, and for sure , it is two wired sensor, yellow and orange,,(yellow wire connected to ignition on)

Jun 26, 2010 | 1995 Honda Accord

2 Answers

SPEEDOMETER AND TACHOMETER NOT WORKING


In cases where both are not working, i believe that it might point to a faulty speed sensor. Is your check engine light on? If so can you retireve the code from it. If not, manualy check the speed sensor. If you need to know how to do this, please let me know. Please rate my response for me. Thank you

Apr 09, 2010 | 1995 Honda Accord

3 Answers

95 honda accord V6 tachometer jumping and cutting out.


I had the same problem with my 1995 Honda Accord V6 2.7L a year ago. It was a pain to have Honda diagnose the problem because it was intermittent and every time I took my car in to the dealership they said they couldn't reproduce the problem, but the longer you wait the more frequently your tachometer will fluctuate. I finally stopped by the dealership when the tachometer was jumping and they were able to diagnose the problem. In my case there was a faulty resistor in the ignition coil, but the entire ignition coil needs to be replaced. I don't know anything about cars but I know this fixed my problem. I went directly though Honda's service center so I know they charged me more than an independent repair shop but I'm looking at my invoice now and I paid $150 for the ignition coil and $200 for labor. After Honda diagnosed the problem I searched for "1995 honda accord ignition coil tachometer" and found that other people had the same problem and replacing the ignition coil was the fix. Hope this helps.

Oct 04, 2008 | 1995 Honda Accord

Not finding what you are looking for?
1995 Honda Accord Logo

3,153 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8984 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...