Question about 1993 Ford Crown Victoria

1 Answer

1993 ford crown victoria passenger power window assembly specs

I put my passenger window down one day and it would not go back up the whole way. Several men I work with tried manually to get it up, which they did most of the way, but unsuccessful the whole way. I have removed the panel to try to fix myself. It appears that some sort of cable has disconnected from the upper portion of the door closest to the top of the door at the window. Is there a way I can get a picture of how this is assembled so I can try to fix it? The motor works. I cannot see up in there to figure out the assembly so a picture is important. If you don't have a picture, can you lead me to a site that maybe I can download one? Thank you for any assistance you can lend! I am a 57 year old grandma that is determined to try it myself before I have to take to a mechanic I have to pay.

Posted by grandma51 on

  • grandma51 Aug 11, 2008

    This is grandma51 again. I guess it would help to say which window on the passenger side if I want a picture, huh? Sorry, it's the FRONT passenger window.

  • tony_pototzy Aug 13, 2008

    window motors down but not up.



1 Answer


  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert who has answered 20 questions.


    An expert that has over 10 points.


    An expert whose answer got voted for 2 times.

  • Expert
  • 43 Answers

The window regulators are cable driven when they come apart they must be replaced

Posted on Sep 29, 2008


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

2007 crown victoria driver side window wont go up or down what's the problem ?

if it is electric window check fuse box or the window motor or the connections or switch

Jan 24, 2016 | Cars & Trucks

1 Answer

Where is starter located on ford crown victoria?

It's located under the car on the passenger (right) side between the front tire and door area.

Jun 09, 2014 | 1993 Ford Crown Victoria

1 Answer

Crown victoria kill switch?

Take it to the dealer, there is nothing you can do.

Mar 24, 2014 | 1993 Ford Crown Victoria

1 Answer

How to replace 1993 Ford Crown Victoria starter

The starter will be under the car on the passenger side. You will need to raise and support the vehicle. There will be two bolts that hold the starter onto the transmission. Remove those two bolts and lower the starter. You can then remove the positive cable end and the smaller start terminal wire. Let me know if you have any questions and I'll do my best to answer them. Thank you for using!

I’m happy to assist further over the phone at

Feb 26, 2012 | 1993 Ford Crown Victoria

1 Answer

1997 Ford Crown Victoria with 197,000 miles. Power windows: The rear passenger window will go down, but will no longer go up.

the switch is shorted, if it moves in one direction but not the other, its the switch , since all the switch does is reverse the power supplied to it,, the up side of the switch is bad, replace it

Sep 09, 2011 | 1997 Ford Crown Victoria

1 Answer

1993 crown victoria drives said window wont roll and it not the motor please tell me what i can do

Check the fuse and wiring to the motor with a multimeter or test light while trying to operate power windows.

Take the panel off first to get at the motor to test for current.

Jul 11, 2010 | 1993 Ford Crown Victoria

2 Answers

Can a fuel pump be accessed through the back seats on a 1993 Crown Vic?

what does a crown victoria look like?? none here in spain ,focus yes ,but knowing ford it uses the same parts so try lifting the back seat up and look for a big round plastic cover.My jaguar has ford name on a lot of components behinfçd the dash

Oct 23, 2009 | 1999 Ford Crown Victoria

2 Answers

Driver Side Front Window Replacement

You just drop it down from the top at a slight angle. Then put the bolts back in and check to make sure that it moves freely.

Dec 21, 2008 | 1993 Ford Crown Victoria

2 Answers

I have a 1993 Ford Crown Victoria LX missing the drivers window. I have a replacement window but cannot figure out how to get it in. Does it slide in from the top, or can the metal frame be removed somehow...

After removing your door panel you should look for rivets holding your glass or motor if equipped with power widows.The window slides down but you may have to pull the window molding aside for easy installation.

Dec 21, 2008 | 1993 Ford Crown Victoria

Not finding what you are looking for?
1993 Ford Crown Victoria Logo

299 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts


Level 3 Expert

85239 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

gerry bissi

Level 3 Expert

4388 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides