Torque setting for 2003 Hyundai Sonata valve cover

The Torque Converter Clutch is located in the torque converter between the engine and transmission. The TCC solenoid is located on the valve body inside the transmission.

Hyundai Sonata 2007 have the two variants which are Sonata GLS and Sonata SE. So check out the engine power of the Hyundai Sonata, which are as follows,

=> The Sonata GLS is powered by a 2.4-liter 4-cylinder engine that makes 162-hp and 164 lb.-ft of torque at 4,250 rpm.

=> The Sonata SE and Limited are powered by a 3.3-liter V6 engine that pumps out 234-hp and 226 lb.-ft of torque at 3,500 rpm.

Fix your car right away, by clicking the link
1999 Hyundai Sonata Workshop Repair Service Manual PDF Download

http://www.autozone.com/repairguides/Hyundai-Santa-Fe-2001-05/Specifications/Torque-Specifications/_/P-0996b43f8037f767 Here you go...

on the 2.7l the crank sensor is above the stater motor. On the 2,4 it is behind the timing cover.

Valve cover bolts are in most cases reusable unless rounded off or striped. If the bolts are m6 89in/lbs should be good m8 105 in/lbs.

I have a 2003 Hyundai Sonata GLS 2.7L V6 , I'm having a problem locating the pcv valve. I was told it was on the valve cover near the fire wall. Is it located near the throttle body? i have to take off the intake to change the plugs so I'm sure I will find it then. Just thought I would ask someone that has pervious experience. Thanks for anyone's input.

Here you can see all the features of the car including the TORQUE.
http://consumerguideauto.howstuffworks.com/2002-hyundai-sonata-13.htm

look carefully on bellhousing and rocker cover/head it has to be somewhere

IT may the fit in the car as the model of the car from 1999-2005 has the same body features ...


Good luck.....