I need help finding crank shaft position sencor on a 1992 licoln town car

Sounds like something electrical, but you will have to narrow down the possibilities to proceed.
When it won't start, you need to find out if you are loosing spark to the plugs or fuel. Then go from there with your diagnosis.

The crankshaft sensor shoul or is located at front of engine bolted to the block . It senses the crank position so it is mounted where it can ,in close proximity of the pulley. Ned

check fuel pressure, at port in engine bay,

well i dont know what year is but the crank position sensor is locate it behind crank pulley in order to have acces to the sensor you ne to remove the pulley first. Note when the crank sensor is bad there should be no fire at your sparks. before keep spending more money dont know if you checked for gas coming to the engine.

ign module or crank sensor or fuel pump

Lower left of engine near oil filter (2).

U will need to have the dealer test the Lighting control module to see which door latch switch is sticking and keeping the lights on, I know the problem well, there are 4 door s so if u do it u will need to remove all four door panels and replace the switches one by one (very hard to replace, they are attached to the door latch) until u find the problem switch, the dealer can ID the problem switch with an electronic Ford scan tool.

Yes they do. and it is easy to do.

More info
Suspension
Handling
What?

behind the main crankshaft pully you need to remove the crank bolt and use a puller to remove the pulley to get at it please rate -jeff