Question about Hyundai Accent

1 Answer

Power windows hi i live in bermuda and have a 2002-03 HYUNDAI ATOS PRIME (rh drive). rh power window not working: when operate w switch no response but motor makes noise. i opened panel found wire cable hanging down loose. i can manually move window up dwn so nothing jamming track. -how would i know if it is motor needing replacement? -do i have to "reload/rewrap" wire cable if not motor?

Posted by erikjbda on

  • 2 more comments 
  • Anonymous Mar 07, 2009

    Hi - I too live in Bermuda and have a Hyundai Atos Prime (2003). The exterior door handle on driver's side (RHS) is not working. How do I remove the door panel? I found 4 screws on the outer surface (inc. 1 recessed and covered in handle) which I removed but the panel was still firmly attached. Thanks.

  • peters1 Mar 07, 2009

    Hi - I too live in Bermuda and have a Hyundai Atos Prime (2003). The exterior door handle on driver's side (RHS) is not working. How do I remove the interior door panel? I found 4 screws (inc. 1 recessed and covered in handle) which I removed but the panel was still firmly attached. Thanks.

  • goldie_23665 Mar 10, 2009

    2005 HYUNDAI ACCENT GS.
    This is my nightmare, rh power window not working: when operate w switch no response,

    The low beams don't work
    The tail lamps don't work only the two lower the one upper middle works fine

  • Anonymous Mar 24, 2014

    We are a having a problem with it running too lean and found a wire coming from the fuel injector system just hanging down on the back of the motor and has almost been rubbed on half by the pulley on the side of the motr

×

Ad

1 Answer

Elias Mavropoulos

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 163 Answers

Remove the front door trim panel.
2. Disconnect the 2P connector from the motor.
Connect the motor terminals directly to battery voltage (12V) and check that the motor operates smoothly.
Next, reverse the polarity and check that the motor operates smoothly in the reverse direction.
If the operation is abnormal, replace the motor.
power windows - 92830a1.gif

Posted on Aug 09, 2008

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Where is the Computer box in the Atos Hyundai?, we want to fix it


does the Hyundai atos Prime 1.1 2008 model have a computer box

Sep 12, 2014 | 2007 Hyundai Atos Prime

1 Answer

Atos gls prime has no power when pulling off and driving


no power
1: lost electrical power
2: lost engine power
3: transmission slips. (RPM way to high)

Jul 18, 2014 | 2007 Hyundai Atos Prime

1 Answer

Hyundai atos 2005 driving so slowly


have you had the OBD codes read at a garage this may help to point you in the right direction,sounds like a sensor(s)

Apr 04, 2014 | 2006 Hyundai Atos 1.1

2 Answers

Hyundai atos sensor testing


Different sensors are tested differently. Search for haynes book on Fuel Injection diagnostics. It shows how to test each sensor. You can also search for online guides to test each particular sensor.

Feb 22, 2014 | Hyundai Atos Cars & Trucks

3 Answers

Rear Brake Lights not working (Hyundai Atos Prime GLS 2007)


could be a bad ground on the light socket or try to buy 1 bulb to see if it works because there is actullay 2 lights in each bulb one for brakes and one for tail light

May 02, 2012 | 2007 Hyundai Atos Prime

2 Answers

I have a 2001 olds aurora. the only door that works is the driver. none of the other windows, door locks, or pass power mirror work. i installed a new window switch on the drivers door and that didnt...


At the moment, I'm just talking about the front passenger side window. On the hinge side of passenger door, should be wiring harness, probably has protective covering, pull the covering back to expose wire colors. Note the wire colors for battery and ground. Battery is voltage, use a test light, check both orange wires for voltage. You can use to testlight also to check ground, check both grounds. With test light connected to battery voltage, probe the ground wire, both of them, if the lite comes on, at least the ground is good enough to turn on the test light.
passenger window-0pkbgv2qrbrqq4t3zadvwxxw-1-0.jpg

May 31, 2017 | 2001 Oldsmobile Aurora

6 Answers

Windows won't roll down


Does the rear window work from the passenger switch?

Oct 07, 2009 | 2003 Cadillac CTS

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

860 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8984 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...