. how do I reset the service time after I have

The only one you can reset is the "time for regular service" message.

To reset this, turn ignition off, hold the trip reset button down and turn key to position II. Keep holding the trip reset until you hear a ping noise and the orange triangle flashes. Immediately release the trip reset and turn the ignition off.
When you start the car next, the message will be gone.

Other messages like "SRS Service required" or "Alarm system service required" can only be rest with a OBD code reader.

If you want to reset the light/message:

Close all the doors, booth, hood etc. hatches,

1. Make sure you have Trip odometer 1 (T1) selected.
2. Turn the ignition key to 'I'-position.
3. Press the trip odometer reset - keep it down.
4. Turn the key to 'II'.
5. Wait till the service light blinks a few times or you hear a 'beep'.
6.Release the trip odometer reset.
7. Turn the key back to '0' - service light is reset.

If this doesn't work, try:
a) 2. before 3. then continue as above
b) 5. Wait until the previous mileage appears again to the trip odometer.
c) 7. before 6.

You can reset the service counter at any time. Do not forget to service your car!

press and hold trip meter reset button with ignition off. switch on ignition while holding button. release button when ignition is on and then turn clock setting button to the right and hold for a few seconds until service light resets.

Reset process should be listed in the owners manual.

Should be something like turn car to on(not running) press trip button twice, turn to off and hold trip button till it resets.

1.- Insert key into ignition, switch to position "1"
2.- Press the menu buttons repeatly until the mileage is displayed within the multifunction display.
3.- Press the cluster illumination button (trip reset button) 3 times in short succession. The battery voltage will be displayed and an audible signal will sound.
4.- Turn key in ignition to position "2"
5.- Press the Up and Down Arrow buttons until service menu appears.
6.- Press cluster illumination button (trip reset button) once. The oil type menu is displayed.
7.- Use the + and - buttons to select the oil used for service.
8.- Press the Up and Down buttons to confirm. The display will show : "Reset Oil Confirmation. Push Illumination button for 3 seconds".
9.- Press and hold the cluster illimination button for 3 seconds. The message "Service confirmed" is displayed.

Close all doors.Turn ignition key to position 1.PRESS AND HOLD trip reset button,immediately turn ignition to position2,keep trip button held untill trip is reset to 0.A yellow warning light will show when it is time to release trip button.Release within 4seconds ,a bleep will be confirm reset.Before you start reset, do not reset trip,If trip has been reset to 0,turn ignition to position 2 hold reset for 10- 15 secs untill previous reading is shown,then start reset.

Reset “wrench” service light

1.) Turn the key to the on position (do not start car)
2.) Press trip reset button 3 times until service shows
3.) HOLD DOWN reset button
4.) WHILE HOLDING button, turn key off
5.) While key is in off position release the button and repress
6.) Turn key back on holding down the reset button
7.) Wait until service resets

This has to be done in 10 seconds. It may take a couple tries.
Variations include...make sure door is shut and car in neutral.

can you scroll down to the mileage indicator for the oil change and re-set it again to zero miles on the oil change.....just an idea

1. Make sure the doors are closed
2. Turn key to position 2,
3. press trip reset button 3 times, untill service indicator screen shows
4. Hold down the reset button and turn key to position 0.
5. while the key is at position 0, release the button and repress,
6. turn key back to position 2 while holding down the button
7. wait untill service resets.

this all has to be done within 10 seconds. it may take a few attempts.

1. Press and hold trip odometer reset button 2. Turn ignition key to run position KPII (not the start position)
3. Wait 30 seconds or until service light "!" begins blinking
4. Release Trip Odometer button
5. Turn ignition to off position
If that doesn't work try:
1. Press and hold trip odometer reset button
2. Turn ignition key to run position (not the start position)
3. Wait 30 seconds or until service light "!" begins blinking
4. Turn ignition to off position, the service light continues blinking
5. Release Trip Odometer button

should reset it for you