Is there a fan belt on a 98 toyota camry - Camry Toyota Cars & Trucks

This is for an earlier year, but should assist, p36

http://www.turboninjas.com/camry/eg1.pdf

I do not how to help you, maybe you can find related answers at wikihow or youtube.
Careucar.com

We would have to suspect the cooling fan relay or fuse, see here p261

http://www.turboninjas.com/camry/eg1.pdf

http://www.2carpros.com/diagrams/toyota/camry/1998

If the water pump have ben leaking for a while the timing belt jump timing.
what you need to do is replace the timing belt and the water pump, is about 500 dlls job.

If you need further help, I’m available over the phone at https://www.6ya.com/expert/flavio_517b938f50183b92

My apologies for the delayed response. I am going back and answering questions that were never answered.
Click on the following Link. It has all the Diagrams for the Timing Belt you will need.
Before Clicking, let me know if this helped.
Again my sincerest apologies...


http://www.2carpros.com/car_repair_information/year/1998/make/toyota/model/camry/1998_toyota_camry_timing_belt_diagram_marks.htm

it may have a stuck coolant fan relay find and unplug the relay switch with a know good relay and if it works properly replace relay

Click on the following free direct Link. It has the Timing: Belt and Mark Diagrams for your 1998 Toyota Camry. Plus additional Instructional and Directional Diagrams.

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!

http://www.2carpros.com/car_repair_information/year/1998/make/toyota/model/camry/1998_toyota_camry_timing_belt_diagram_marks.htm

Hi

Replacing Serpentine belt on a Toyota camry 2003—


Step 1--Examine the belt placement of your Toyota Camry fan belt so that you will remember how to put it back once you have removed it. Refer to the vehicle owner's manual for further information. Locate the pivot bolt on the front passenger side of the engine. Loosen the pivot bolt with a socket wrench.


Step 2--Loosen the adjustment locking bolt that is just below the tensioner pulley with a socket wrench, and then loosen the tensioner pulley to allow the belt to move free.


Step 3--Check the belt for any signs of cracking or irregular wear, so you can fix any problems that may exist with the pulleys. Remove the fan belt from the pulleys on the engine and take it out of the engine compartment.


Step 4--Wrap the new fan belt around each of the pulleys the same way it came out. When you have the belt in place, tighten the tensioner pulley with a socket wrench.


Step 5--Tighten the adjustment locking bolt and the pivot bolt with a socket wrench, and then look over the engine to check that everything is back in place.


Step 6--Turn the vehicle engine on and watch it for a few minutes to verify that everything is operating properly, then turn the engine off.


Please refer to these links for serpentine belt diagrams—

Serpentine belt on a Toyota camry Link 1

Serpentine belt on a Toyota camry Link 2

Please do accept the solution and revert for further assistance.

Thanks
Rylee

Both the 4 and 6 cyl. engines in this car have belts. The 4's don't last as long because they lack a tensioner and get noisy. Toyotas for the most part do not get hurt when the belt breaks. non interference engines...nice huh?