Question about 2004 GMC Canyon

1 Answer

Adding Flex Fuel Kit to 2004 GMC 5 cylinder

I would love to make my 04' Canyon Flex Fuel compatible. Any reason out there this would not be a good idea for this 5 cylinder in-line. Have there been any notable problems with the engine and related components that might cause a problem later? I like my truck and do not want to sell it for a factory FF compatible. I am just about ready to buy a conversion kit.

Posted by zucccchini on


1 Answer

Colin Stickland

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • GMC Master
  • 22,485 Answers

You can do anything if you put your mind to it,a big lumbering slow reving yank motor is difficult to kill anyway ,running it on hydrogen ,rape seed products or anything else shouldnt hurt it .we have biodiesel here in spain and biopetrol as well but we dont know it only the blenders in the refineries know what goes in so fit it and save some money on gas if its any cheaper,if it not then dont waste money buy a nice small diesel truck like a ford connect ,VW caddy

Posted on Nov 17, 2008


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

2004 gmc canyon slow blinking lights

There isn't one. There's two fuses for the turn signals. The flashing is controlled by the Body Control Module.
you can find it at almost any auto parts store just to give u an idea. Right side kicker panel. Good luck.

Sep 08, 2014 | 2004 GMC Canyon

1 Answer

How to remove the front rotor 2004 canyon

Park the Canyon on a flat stretch of road or driveway and open the hood.

  • 2 Remove the master cylinder cap located near the firewall on the right side of the GMC's engine. Remove half of the brake fluid in the reservoir with a turkey baster. Lay the cap over the container.

  • Read more: How to Change Rotors on a 2005 GMC Canyon '

    Oct 12, 2012 | 2004 GMC Canyon

    1 Answer

    Can i fix my ecm on my 04 gmc canyon as a diy?

    yes you can do it /take your time to fix it/just clean out blocked pipe/use air line to fix

    Mar 07, 2011 | 2004 GMC Canyon

    1 Answer

    2004 GMC Canyon 3.5L crew cab with Maint Req'd light

    It may be true that the dealer told him that, however I doubt the truck rolled off the assembly line like that. I also doubt GM put that light there for no reason. There is a reason it came on and if it was me I would want to know.

    Jan 20, 2010 | 2004 GMC Canyon

    1 Answer

    Cant find the starter on my 04 gmc canyon

    take your serial number to the nearest gmc dealer, and have them look for it.

    Oct 08, 2009 | 2004 GMC Canyon

    1 Answer

    I have a 04 gmc canyon and it will not shift out of 3rd

    If it's an Automatic and you have a check engine light on, it's best to have the the 3/4 shift sylenoid checked out.

    Jan 11, 2009 | 2004 GMC Canyon

    1 Answer

    Changing fuel filter

    If you don't depressurize the system you will get sprayed with fuel.

    Oct 14, 2008 | 2004 GMC Canyon

    1 Answer

    2006 gmc canyon 3.5 inline 5 cyl.

    Not much of a vacuum diagram on this vehicle. Uses vacuum mainly for the EVAP system ( not a good source). Best bet would be to use a source that stems directly from the intake manifold. Good luck

    Jul 07, 2008 | 2006 GMC Canyon

    2 Answers

    2004 GMC truck


    May 27, 2008 | 2004 GMC Canyon

    Not finding what you are looking for?
    2004 GMC Canyon Logo

    118 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top GMC Experts


    Level 3 Expert

    85239 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22485 Answers

    Jeffrey Turcotte
    Jeffrey Turcotte

    Level 3 Expert

    8984 Answers

    Are you a GMC Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides