Question about 2004 Chevrolet Cavalier

1 Answer

Starter how hard is it ti replace in a 2004

Posted by jdawson257 on


1 Answer


  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert that hasĀ over 500 points.


    An expert who has answered 200 questions.

  • Expert
  • 255 Answers

Hi ,replaing your sterter can be easy ,disconect your battery positive cable disconect the big cable at the starter, then the small one ,now remove the two screws that hold the starter in place,just take it out ,installation is the reverse procedure .. good luck......

Posted on Aug 23, 2008


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Where is the starter located in the 2004 scion xb?

Helpful information.

By the way, It is VERY hard to remove the TOP bolt. I ended up removing the Battery and 2 Air hoses to be able to access it and then apply enough torque to get it out. A regular ratchet and a pipe aided in applying enough torque to move that bolt and then remove it. There is a diagram that shows the location of the top bolt (it is above the bottom bolt but located on the OPPOSITE side.
This diagram of the bolt placement will help, check this link:

Feb 28, 2017 | 2004 Scion xB

3 Answers

1990 zx10 starter just spins does not engage the motor to turn over how do I fix it I've already replace with a new starter...same issues...

the solenoid is not moving the pinion gear forward to engage in the flywheel so check that you have connected the wire from the starter switch correctly. Next point to check --if this is an auto matic vehicle ,check that the flex plate has not broken away and not in the position for the pinion gear to engage ti.

Jan 01, 2015 | Cars & Trucks

1 Answer

Hard time starting 2004 Kia Sedona

Mu Sorento was hard to start. Eventually I noted that the coolant level was very low. When I filled ti, car started really fast. Another, hard to start, the brake fuel was very low, filled it and it started real fine. A coincidence or are there alarm settings there?

Jan 25, 2014 | Cars & Trucks

3 Answers

Sometimes my 2004 dodge neon wont start ,just a click noise then sometimes starts fine and i have no battery lights going of??

Sounds like you have a potential problem starting with either your starter itself or the starter solenoid...

Dec 07, 2010 | 2004 Dodge Neon

1 Answer

Location of pcm on 2005 pacifica?

I have a 2004 Pacifica and mine is on the drivers side front, underneath between the bumper and the wheel splash guard. You will need to remove the splash guard ti access the PCM. Not very hard at all. Replacement time for a handy DIYer: about 1/2 hour. Good luck!!

May 12, 2010 | 2005 Chrysler Pacifica

1 Answer

2004 ford taurus starts hard 3 or 4 cranks to start it

Is it my starter and is it easy to replace

Jan 30, 2010 | 2004 Ford Taurus

1 Answer

Won't Start - 2004 Ford Expedition

find the starter and and tap it with a hammer handle or big screw driver handle. do not hard, but hard enough to activate. it should start. go buy a new one.

Jan 03, 2009 | 2004 Ford Expedition

Not finding what you are looking for?
2004 Chevrolet Cavalier Logo

Related Topics:

97 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts


Level 3 Expert

85239 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8984 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides