SOURCE: retracting wiper blades lexus es 330 2004
I am the owner of a 2004 ES330 and the answer by 240 CPR is totally wrong. If you look in your owners manual on how to replace the wiper blades you'll find that all need to do is push down firmly on the wiper arm and it'll snap back down where it belongs.
SOURCE: cd error
I hate to be the bearer of bad news... that error code means that you have a CD that's bad in the 6 disc changer.... If you're handy... you can take your radio out and manually remove the cd's and make sure that the 6 trays are aligned properly and not stuck together. (known issue) However, Lexus/Toyota does NOT repair ANY of their electrical components. They want you to pay for a NEW one at the tune of 800.00 PLUS installation... and they send the old one back to Japan and remove the CD's and mail them to you. (at no extra cost... as the service rep was telling me.. as to benefit feature me on the sale of the replacement unit.) Next be ready for the "Disc Read Error, Check Disc" on your navigation... lol.. it's a 2.10 motor that moves the lens that reads the DVD navigation CD.. and once again .. they don't replace or repair... that's a 4500.00 item plus installation.. GOTTA LOVE YOUR EXPENSIVE CAR NO? ;)
SOURCE: ES 300 servicing: Lexus Dealer vs. Toyota Dealer
no there is not really a downside dealers are good it doesn't really matter who does it but lexus is more familiar with lexus vehicles than toyota because they specialize in it but something like that is simple .
SOURCE: same problem
there is a cancel button in the glove box, check this first to make sure its not activated.
SOURCE: Repalcing the main beam headlight bulb on the 2004 Lexus ES 330
The bulb is held in place by a wire capture that hooks under a small metal hook on bottom of housing. The rubber shroud or boot needs to be pulled off first to expose the bulb and intermittent socket that actually holds the bulb. To remove the bulb push the wire capture (the end that is looped) toward the front of the car and then to the side to disengage the wire from the small hook, be sure to note the position of the plastic socket that the bulb plugs into as it only fits one way.Notice the tab on the bulb base faces up. The bulb does not fit snugly in the headlight socket, it is held in place entirely by the wire catch.
147 views
Usually answered in minutes!
×