Question about 1995 Ford Explorer

2 Answers

1995 ford explorer

My right dim light and fog light don't work they are one the same fuse but the fuse is not blowed and i replaced the blub whats wrong?

Posted by Anonymous on

Ad

2 Answers

Anonymous

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Expert
  • 57 Answers

Does neither bright or dim work? Then it must be a ground. There is only one wire on the switch for both bulbs. Get a tester and check to make sure voltage is getting to the light when it is turned on. It should be. If you detect voltage you know its a ground.

Posted on Aug 06, 2008

Ad

Jude Meredith

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 417 Answers

Hi,

you have a bad ground wire to the frame somewhere, its probably a rusted connection, look for a black wire from the back of the headlight to the ground wire connection at the frame, remove that wire off the frame and sand that connection with sandpaper, replace.

good luck

J

Posted on Aug 06, 2008

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What to do right side runing light is working. Left is not 1996 voyeger van


Chexk fuses first. Some vehicles have seperate fusing for left and right lighting circuits. Which specific lights are you referring to? Daytime running lights (that would be dim headlight on only...no tail or parking light), parking lights (front and rear), fog lights? The term running light is used br people for different light s

Jul 13, 2016 | Cars & Trucks

2 Answers

My turn signal fuse blowed got new one now they dont work why


canada or USA, (diffr. laws, different wiring, even DRL up there)
station wagon or NOT?
THE TURNS FUSE BLEW OUT. 2nd time, 3rd,,,?????
that means the circuit is overloaded or shorted.! (prevents fire)
but did it blow a 2nd time, why not say so???

all 4 lamps dead. or stuck on, or flash odd. or what? dim?
does the cluster lamp flash, , in blink or emerg. mode?
wont work , means what, (dead or stuck on or dim)?????
do emergency flashers work? ,dead, stuck on what?
does car drive perfect day or night?
are any other things on car dead, of odd acting?
we see all this , 1st 5 min in a shop, zero here.
ive answered Forenza blinks here, many times.
ever search?

ill now answer by guessing USA non stationwagon and no DRL.
dash box fuse 4 kills blinkers

EF1 (engine fuse) 1 good?
dash fuse 14 and EF1 can kills emerg. flasher

so of Emergancy flash lamps blows fuse 14,(smaller of 2)
then the blinkers are in fact shorted.
does it?
if yes, then find out which side blows the fuse 3.
turns left blow or turns right blows.
so if say turns right blows, F4 fuse.
if true ?remove all bulbs front rear right bulbs.
does the fuse hold now,(means not blown)
then buy new lamps there. problem solved
bulbs can in fact short.
not just blow open.
Tell the full story and all this gets easy.
For sure emergency flash,

26123255-vhg5j1pxaeih5p05yacvrs2p-1-0.jpg

Mar 09, 2016 | 2007 Suzuki Forenza Sedan

2 Answers

\1991 geo metro dim headlight pass side


in low beams or high or both?
that is caused by:
1: bad held lamp. old lamps can go dim.
swap left and right, if dim follows bulb, bingo weak bulb or wrong type bulb. buy matching blubs (same brand and P/n)
2: bad wiring to lamp. damaged wires, or connectors to same.
4: bad combo switch. (if low beams)
5: bad fuse or holder, corrosion , to either.
head lamp fuses. there are 2. left and right.
6: hackers, many hackers put in wrong lights. inspect it.

Sep 30, 2013 | 1991 Geo Metro

2 Answers

I have 89 bronco 2 my brake lights turn signals both work my tail lights don't work have check fuse n blubs what might be the problem


The turn signals and brake lights use the same circuit and filament in the bulbs. The tail lights are on the other circuit which comes from the headlight switch.
Do you have power on the tail light fuse ?

Feb 25, 2013 | 1987 Ford Bronco II

1 Answer

My dash light don't work fuses are good


sounds like a blub problem is quite common cheap bulbs on this spec hope this helps

Mar 24, 2012 | 2005 Chevrolet Aveo

1 Answer

I have a jetta fog light are not working fuse is good new blubs any ideas?


there are many problems with the 1995 jetta ignition. All your lights,head lights, fog, and instrument lights get power when you turn the key on. I had to bypass alot of this when i got my jetta. I also reran the wires from the fog and headlights so you can manually turn them on

Jan 30, 2010 | 1995 Volkswagen Jetta

1 Answer

The dash board lights are not working and the


hi mate if you keep blowing fuses disconnect your front fog lights and try again if your dash lights work then a bulb has failed and gone to earth if it still blows the fuse disconnect the dahs pod (clocks) and reconect the fog lights if it does not blow the fuse the it probably is the dash pod or something associated with the pod hope it helps

Apr 02, 2009 | 1994 Subaru Impreza

2 Answers

2002 Grand Am GT Headlights seem dim , fog lights dont work


Check at the headlight sockets for a bad ground.

Mar 02, 2009 | 2002 Pontiac Grand Am

1 Answer

Fog lights


check fuse #7 in the fuse block inside the vehicle and fuse #25 in the fuse block under the hood...more than likely you blew one of these fuses when it sparked. as for the drivers side being inop once you replace the blown fuse if you have a test light check for voltage at the bulb connector...the light assembly itself may be bad

Sep 28, 2008 | 1999 Jeep Cherokee

Not finding what you are looking for?
1995 Ford Explorer Logo

128 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

gerry bissi

Level 3 Expert

4388 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...