- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
I was changing my interior light ? which light ? What's with - short ? You short the wire for the interior light ? Need more info ? The interior lights on your vehicle are controlled by SJB - smart junction box . All the thing's you have listed are controlled by the smart junction box ,fords BCM - body control module .
Just had a similar problem. Brake (stop) lights and horn didn't work. Couldn't find mention of stop lights in fuse chart. Found horn fuse to be slot 21 in the engine fuse block (not the fuse block in car interior). Replaced 15A fuse and all now ok.
Does the 3rd brake lamp illuminate? If so then your problem is multifunction switch.If it doesn't do the following checks.
Check for power to and thru the brake lamp switch itself.If you do not have power to the switch check fuse no. 10(20 amp) in the interior fuse panel.If you have power to the switch then depress brake pedal and make sure you have power thru the switch.If this is ok the check Fuse 22(20amp) with brake applied..
Hopefully you've gotten your car fixed by now, but mine just did the same thing today 4/25/2010. While changing the dome light, I blew the 10 amp 'Batt Saver' fuse located inside the car driver side fuse area. The mini fuses in the interior are nearly impossible to check if they are blown without a tester. I bought a cheap one for $5 at AutoZone and discovered. Once replaced, all worked fine. Hope this helps someone else with the same problem I had today.