Question about 1999 Ford Explorer

1 Answer

Windows All of my windows don't work..up or down, could this be my fuse or a regulator. If it is either one where is it loated?

Posted by nanie_74 on

Ad

1 Answer

Mike Mangum

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    New Friend:

    An expert that has 1 follower.

  • Expert
  • 73 Answers

Try changing the fuse relay. It is the #4 location in the power distribution box under the hood on the drivers side.

Posted on Apr 05, 2010

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Driver side window won't go down 2011 nissan juke


Common issue with the juke are faulty window regulators. Check the other possibilities before hand for regulators are not cheap. All your windows are powered from the same fused circuit so if other windows work then the fused relay is good. If you hear a ckick when you hit the switch and the window doesnt move, its the regulator. No clicks no sounds could be a potential switch failure.

Mar 18, 2018 | Nissan Cars & Trucks

1 Answer

Power windows not working


Your windows will not open or close. It is Very likely that a fuse or relay will cause a window to not roll up !! or down!!. If You Check The Fuse And The Relay Are Good.Then I Would Suspect The power window motor, door switch or window regulator has failed. ... Hearing the motor running, without the window working, usually shows the power window regulator or clutch are bad.
Hope This Helps!!

Nov 20, 2017 | Cars & Trucks

1 Answer

How do I fix the power window in my 1997 Ford Thunderbird the passenger side works but the driver side don't work. What do I need to do? I already changed the fuse.


Open the door pannel check the window regulator by pushing the up and down button. If no noise herd replace the motor but before replacing make sure the window is set in the window track properly

Mar 12, 2012 | 1997 Ford Thunderbird LX

1 Answer

2002 mercury mountaineer on e window not working


All the windows are on the same fuse, if the other windows are working fine, it's not a fuse issue. I susppect the motor or the window regulator.
With your ear close to the door panel, press the window switch up and down, if you hear the motor and grinding noises then the window regulator needs to be replaced, if you don't hear anything then the motor is bad OR no power is getting to the motor. either way you will have to take the door panel off and to fix.
HTH

Nov 23, 2011 | 2002 Mercury Mountaineer

1 Answer

The windows on the back of taurus ford 93 don't work why?


This could be caused by a blown fuse, a faulty window switch, a faulty window motor regulator, or a faulty window motor. Start by checking your fuses inside the cabin of the vehicle for any blown fuses. Next, check the voltage going to the motor when the switch is pushed up or down. If there is no voltage getting to the motor, you have a bad switch or regulator. If voltage is getting to the motor, you have a bad motor.

I’m happy to help further over the phone at https://www.6ya.com/expert/jeremy_69f3cc28d95bf514

Aug 03, 2011 | 1993 Ford Taurus

2 Answers

How do I find a fuse diagram for a 2001 Toyota Celica the right front passenger window will not go up or down


Go to a local repair shop that has a Data Base
& have them print what you need

Check all fuses,don't need a diagram for that

If any window works,it won't be the fuse

If the fuse is blown,replacing it won't fix anything
It will blow again,

So,you will need to check switches first,then remove
the door panel to access the window motor or
window regulator.

May 23, 2011 | Toyota Celica Cars & Trucks

1 Answer

My drivers side window wont roll down. Are there any fuses or small things i need to check? Dont want to order a new window motor if i dont have to. 2000 chevy blazer 2door


If the other window is working , I would take it apart first and check voltage at the motor plug and check the window regulator, this is the part that holds or attaches the motor. If these are good then I would get the motor. If you don't have power to the motor plug then work your way back to the switch.

May 22, 2011 | 2000 Chevrolet Blazer

2 Answers

Driver side power window stopped working


Hello,

you should check the fuses first, (you will find a table and diagram in your owner´s manual) although I don´t think that it has to be fuse, the problem will be the switch or the power window motor itself.

So please check the wiring between the door and the body for damaged isolations etc. as well.

Jun 25, 2010 | 2005 Dodge Grand Caravan

Not finding what you are looking for?
1999 Ford Explorer Logo

143 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

gerry bissi

Level 3 Expert

4388 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...