I DISCONNECTED THE BATTERY CABLE ON MY 1998 GMC S-10 SONOMA. NOW THE RADIO WILL NOT WORK UNTIL I ENTER THE CODE, WHICH I DO NOT KNOW. I PURCHASED THIS VECHILE USED.I CALLED THE PREVIOUS OWNER. HE ALSO DOES NOT KNOW ANYTHING ABOUT THE CODE.HOW CAN I FIND OUT THE CODE AND GET THE RADIO WORKING AGAIN ?
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
thats the code u manually punch in the radio number buttons to renergize the radio an take it out of lockup mode. wont play in this mode. any time the battery is disconnected on the vehicle this code will need entered in radio to make it work again. your owners manual should have code in it or written on a card. this is if ur radio is stolen it cant be used till the RADIO CODE is entered.
Worn out key cylinder or ignition switch. Cant tell when key is off. There is a wire which as you put in the key it makes contact as the the key pushes this metal contact up. You can unplug it. It should be a blue wire you should be able to see once you remove the covers of the colomn.
check battery volts should be 12.6 volts battery either weak,or battery cables could be loose or battery cables and post has corrossion clean corrossion from both cables and post using small steel brush clean battery post with.first turn off radio before disconnecting negative battery cable.
P1133 - Heated Oxygen Sensor (HO2S) Insufficient Switching Bank 1 Sensor 1 I would have the repair shop see if they either damaged or left disconnected the oxygen sensor for engine cylinder bank one upstream sensor, this sensor would have been disconnected if the oil pan was removed.
either the radio code is wrong or you have locked the radio down you only have three attempts to enter the correct code if this is the case disconnect thenegative battery cable for 10 minutes then reconnect and try again. If the code is wrong the audio unit will have to be removed so you can get the serial number to give to the honda dealership so they can get the correct code
you can only try the code install 3 times before the radio locks up.
you will have to disconnect the battery for 10 seconds if that happens. the 5 digit code gets entered where the station select buttons are 1 2 3 4 5 6 enter the code there.
turn the radio off push preset buttons 1 &6 while holding these buttons turn on the radio the serial# will come up call the dealer with this # they should give you the radio code if you have a problem write back i can get it for you if you have error on the radio then disconnect the battery cable neg for aprx. 30 seconds reconnect the enter the code using your preset buttons