- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
good question. what i would have to tell you is to have the car checked again to make sure that you get the same code than i would see if there is any warranty on this if not you will have to have a repair shop perform the repairs You might be able to get the part from autozone or cragen that will save you some money there
best regards mike
you have a transmission fault the D4 light blinks to tell you that there is a transmission problem when the light is blinking the transmission computer put the transmission into limp home mode so it will not shift normally and you should try not to drive it very far when it gets to this stage you need to have the transmission codes check to pin point the problem
Blinking light means there is a trouble code.There is a procedure to manually pull codes from the computer.Have the codes checked,have them written down.It could be just shift solenoids,or could even be something more serious,but thats the starting point.