Could you please email me a diagram of the timing marks on a 4g63 sohc 2000cc motor

valve clearances sohc 4g63 carb motor both hot and cold

Valve clearance - INLET mm: 0,15 hot
Valve clearance - EXHAUST mm: 0,25 hot
This engine is set hot if you are repairing the engine and have to do this cold
then set to 0.10mm INLET and 0.20mm EXHAUST
Then once hot readjust to specs

you tube your car

check this pdf for 4G63, and 4G64 motors.......check section 11C-33

http://www.austarion.com/tech/4g63.pdf

I hope this helps

Click on the following direct, free Link. It has the Timing Belt + Mark Diagrams for your 1995 Hyundai Accent 1.5L SOHC In-Line 4-Cylinder Alpha Engine. Is also has additional - very helpful Instructional and Directional Diagrams.

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!

http://www.2carpros.com/car_repair_information/year/1995/make/hyundai/model/accent/1995_hyundai_accent_timing_belt_diagram_marks.htm

hope this helps!

Click on the following free direct Link. It has the Timing: Belt and Mark Diagrams for your 1992 Subaru Legacy.

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!

http://www.2carpros.com/car_repair_information/year/1992/make/subaru/model/legacy/1992_subaru_legacy_timing_belt_diagram_marks.htm

tdc @ 1cyl. cam shaft has triangle stamp mark on face of the gear.both valves for # 1 should be closed in compression stroke and triangle should be pointing at left side top of head(9 o'clock) on the silent shaft and oil pump pulleys both marks must align with each other , use a metal rule for a straight edge.it would be wise to purchase a haynes manuel for your vehicle.this manuel gives you illustrations and step procedures to align all components on your g63b engine ....chris

That car has the 4G64 engine in it. The manual below covers both the 4G63(DOHC) and 4G64(SOHC), but it should definitely help you get that timing set. Timing belt removal procedures start on page 33.

http://www.scribd.com/doc/4570538/Mitsubishi-4G63-4G64-Engine

Your car will have the 2.4L SOHC engine in it (AKA 4G64). This manual will show you how to replace the timing belt (and more). Timing belt procedures start on page 33.

http://www.scribd.com/doc/4570538/Mitsubishi-4G63-4G64-Engine

(P.S. this manual also includes the 4G63 engine, you can identify your engine by looking at the procedures for the Single OverHead Cam[or SOHC])

Here is your diagram, Please leave me a FI YA comment if I fixed ya thanks http://www.2carpros.com/car_repair_information/tec_info/1998/eagle/talon/1998_eagle_talon_timing_belt_diagram_marks.htm