At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
I have a 1995 toyota camry. engine cranks but wont start, thought it was fuel pump after testing when key turns on and did not here pump engage, i replaced pump car still wont start pump not engageing
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Jerry Insurancehttps://getjerry.com > Car Insurance
7 days ago - Then, hold the key in the turned position for about 30 seconds. At this point, your Camry should recognize that you are using the correct key.
Or on more modern models.
This can be done by either inserting the key into the ignition and turning it one "click" or pressing the engine start/stop button. Next, press the power button on your Camry's stereo and then press and hold the "up" tuning button.
Feb 16, 2021
check that the injectors are spraying because that is the only other thing that is missing from the compression -spark -fuel triangle that is needed to make an engine go.
no spark crank sensor. good you getting fuel but with no signal from the crank sensor it will not fire up. can also be oil pressure switch so if the oil light wont go out while cranking the engine it can be this as well
The fuel pump should run for a second or two when you first turn the key on, but then shuts down to prevent the engine from flooding if the computer does not get a signal from the crank or cam sensors which the computer uses to trigger the ignition system. So no spark no fuel. Check to see if you have a spark in the ignition system.
Along with the fuze, there is also a relay in the system. If the relay is defective you will not have any power to the pump. Best to check for current at the pump connector (near or at the fuel tank) with either a test light or volt meter. If you have power, the pump is bad. if not, check the relay and retest.
×