Question about 1998 Ford Explorer

1 Answer

What are the error codes p1000 and p1116 - 1998 Ford Explorer

Posted by tammycappa on

Ad

1 Answer

Anonymous

P1000-OBD System Readiness Test Not Complete

P1116-Engine Coolant Temperature Sensor Out
of Self Test Range

Posted on Mar 05, 2011

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

My car won't start and is showing a p1000 code . What does this mean?


P1000 is a manufacturer specific fault code:

Ford P1000: OBDII Monitor Testing Not Complete.
Jaguar P1000: Engine control module (ECM) - internal error.
Kia P1000: System diagnosis incomplete.
Land Rover P1000: Engine control module (ECM) memory erased - no codes stored.
Mazda P1000: OBDII Drive Cycle Malfunction.

So depending on the manufacturer of your car would depend on the meaning of a P1000 code!

Jan 21, 2015 | Cars & Trucks

1 Answer

Radio code


OBD system tests
Possible fault codes:
P1000 OBD system tests Operation not
completed
Setting of the fault code P1000 has no
influence on the system <Engine
management>, smooth running or performance
as long as it is automatically erased
whilst driving.
The fault code P1000 indicates noncompletion
of system tests.
* Misfire detection
* Evaporative emission control system
* Exhaust-gas recirculation
* Lambda sensor
* Exhaust gas catalytic converter
The fault code P1000 cannot be erased. It
is cancelled automatically once the
vehicle has completed certain driving
cycles.

Jul 27, 2013 | 2007 Ford F

1 Answer

P1115 and P1116 Error Codes


P1115 Engine Coolant Temperature (ECT) Sensor Circuit Intermittent High Voltage/IAT - B Circuit High Input
P1116 Engine Coolant sensor out of range/ECT Sensor Out Of Self Test Range
--------
Renault+Nissan key prog 2 in 1

Nov 29, 2012 | 2000 Mercury Sable

1 Answer

I have a 2000 Ford Focus. The other day while driving the engine suddenly lost power. when I pulled over and pushed in the clutch it stalled and would not start. I towed it home and replaced spark plus,...


Is this the dual overhead cam Zetec engine or the SPI engine? Get a spark tester, a compression tester, and a can of starter fluid. You can rent the compression tester from some part stores. Spray some starter fluid into the intake and try to start the engine. If it runs or tries to start, then you are probably looking at a fuel issue. If it doesn't try to start, remove a spark plug wire and install the spark tester. If it has spark, then remove the spark plugs and use the compression tester in all four cylinders. If you can't get more than 150 psi on each cylinder, then you are looking at a timing belt issue. Post the results of your test here for more help.

Mar 21, 2011 | 2000 Ford Focus

1 Answer

I have 2004 prius and i'm getting these codes p1116 / p1121/ p3193


P1121: Accelerator Pedal Position Sensor Range/Performance Problem.
P1116: Coolant Temperature Sensor Circuit Stack for Coolant Heat Storage Error
P3193: low or no fuel

Feb 03, 2011 | 2004 Toyota Prius

1 Answer

Car won't start. Error codes - p1000, p0452, p1642


The following results can be found on http://www.blujag.co.uk and would appear to indicate a fuel system problem. hope this helps
Fault Code P0452
Indicates a Generic Power-train fault
The fault is generally due to a problem in the Emission Control area
Fault Description: Evaporative Emission Control System Pressure Sensor Low Input
Fault Code P1642
Indicates a Manufacturer Specific Power-train fault
The fault is generally due to a problem in the Computer & Output Circuit area
Fault Description: Fuel Pump Monitor Circuit High Input

Jul 16, 2010 | 2003 Jaguar Xkr

1 Answer

My scan tool says p1000 when i look up the codes on my f150 just woundering what p1000 is


Hello, my name is Ben. Here is the short answer: P1000 OBD-II Monitor Testing Incomplete
P1000 will be set anytime there is any interruption of power to the PCM. This action could be but is not limited to, changing the battery, clearing history codes, or reprogramming the PCM. If there are no other codes stored the P1000 will clear itself after several "driving cycles". I hope this helps you, Ben.

Jun 24, 2010 | 2002 Ford F150 Regular Cab

3 Answers

What dose the code p1000 mean and p1645


P1645 EVAP Solenoid Output Circuit
P1000 Scan not complete. meaning it didnt finish scanning

Sep 14, 2009 | 2002 Jaguar X-Type

2 Answers

Fault code P1000 [18,2,10,0],Ford Fiesta 2005


P1000 means that you or someone has disconnected the battery,and the car has not been driven far / long enough for the computer to relearn its stratagies.
Engine light could be the fault of the speed sensor, or wiring to the sensor.

Jul 13, 2009 | 2007 Ford F

Not finding what you are looking for?
1998 Ford Explorer Logo

Related Topics:

1,292 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

gerry bissi

Level 3 Expert

4388 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...