Question about 2001 Mitsubishi Montero

1 Answer

My Mitsubishi GDI 2001exceed model does not accelerates,I checked by scaner its says no trouble codes i had changed all of the sensors actuators and the ecu module that are verified to be working on the other same model mitsubishi, car still raving 2000rpm only.please anyone could assist me in this matter..thanx

Posted by Anonymous on

Ad

1 Answer

Anonymous

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    New Friend:

    An expert that has 1 follower.

  • Expert
  • 60 Answers

Have you check you air filter ,fuel filter ,if these are plunged the car will have problems excellerating

Posted on Mar 04, 2011

  • Anonymous Mar 04, 2011

    if there are no codes telling you theres a problem it may be something like that ,you may have a brake caliper sticking,or e-brake hanging up.

  • Arthur Aug 05, 2012

    I am trying to locate the fuel filter and failing to find it on my Mitsubishi Dion, can you please assist, my email is [email protected]

×

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a pajero 3500 gdi 1997 model, that is light engine check in dashboard and can't accelerate more than 3000 rpm.


ECU has logged an error code. YOu need to read it out with a tester and then fix the reported problem or clear the error code.
ECU goes to safe mode with reduced power if certain errors are logged.
Regards Winfried

Apr 12, 2017 | 1992 Mitsubishi Pajero

1 Answer

What is the difference between the wiring for the mitsubishi 4g93 gdi shifter and the 4g93 gdi turbo shifter


probably not a lot except for the turbo sensor or actuator wires
which may be there already just not connected to anything
if you can get a schematics of the wiring and see if there is as it may say applicable to--- and list the models

Oct 05, 2015 | Mitsubishi Cars & Trucks

2 Answers

What causes my 2001 mitsubishi GDI car to be firing only on number 2 and 3 cylinders


Check to see if #1 &4 use a common coil pack. If so, = likely culprit.

Jan 15, 2015 | Mitsubishi Cars & Trucks

2 Answers

How do I solve for My Hyundai sonata model 2009 code P2110 , P2118 in scaning. I changed throttle body and TP sensor. after change of these even I am getting problem in accelerator not increases above


P2110...Faulty Throttle Actuator Control Module
- Throttle Actuator Control Module harness is open or shorted
- Throttle Actuator Control Module circuit poor electrical connection

P2118 - Electronic Throttle Control(ETC) system is made of the components throttle body, Throttle Position Sensor(TPS)1&2 and Accelerator Position Sensor(APS) 1&2. The throttle body contains the actuator, the throttle plate and the throttle position sensor (potentiometer), which are integrated in one housing. The actuator consists of a DC motor with a two-stage gear. The opening angle of the throttle valve is detected by the throttle position sensor which is mounted on the throttle body. And it provides feedback to the ECM to control the throttle motor in order to control the throttle valve opening angle properly in response to the driving condition.

Jan 06, 2015 | 2009 Hyundai Sonata

1 Answer

Throttle position sensor


run fault codes to check which sensor is at fault.

Oct 08, 2013 | Cars & Trucks

1 Answer

Mitsubishi GDI 3500 engine 6G74 it cranks but no spark any solutions


Got Mitsubishi challenger 6g74 there is no spark, changed the crank and cam sensor, fuel is coming but still no spark. please help

Apr 24, 2013 | Mitsubishi Montero Cars & Trucks

1 Answer

Mitsubishi Pajero Exceed 1997 Model GDI V6 3500,There's power, it cranks, but no spark,I already check all the spark plug,and also cannot synchronize to ECU,I also change the ECU but still the same,I even...


I have been experiencing the same problem in the same model upon checking the fault codes I've found the temp sensor, crank, and cam sensor error codes.
I've been aware of the temp sensor for sometime the other two error codes are new and go with the problem getting worse - about to replace the temp, the local agent said he's aware of this and often this is the issue with the fuel mixture becoming incorrect due to the spike in the temp sensor after a run.


I'll fix this first and see what error codes remain, and how the problem is affected.

Mar 26, 2011 | Mitsubishi Montero Cars & Trucks

1 Answer

My Mitsubishi GDI does not accelerates,I checked by scaner ,it gives a code of Alternator.


Thats because the software is encrypted to prevent home mechanics ,take it to a dealer

Jan 03, 2011 | Mitsubishi Outlander Cars & Trucks

1 Answer

Engine shut off at 4000rpm


this sounds like an electronic problem. the control unit thinks about 50000 cycles in a second. it's bound that there could be a problem. a second hand black box or computer box should fix your propblem. goodluck

May 07, 2010 | 1999 Mitsubishi Galant

3 Answers

Gdi engine issues


I got the same trouble, launch shows Air Flow Sensor, Fuel Pressur switch. Ireplace both few hours OK but again same trouble.
GDI got a common truble its high pressor fuel pump.
check fuel pressor if its low thats the prob
bye

Mar 23, 2010 | Mitsubishi Outlander Cars & Trucks

Not finding what you are looking for?
2001 Mitsubishi Montero Logo

Related Topics:

166 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14866 Answers

Vincent G
Vincent G

Level 3 Expert

2363 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...