Question about 1990 Ford Econoline

1 Answer

Wat direction do u turn the nut to take off the fan cluch

Posted by blevins20200 on


1 Answer


  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.

    New Friend:

    An expert that has 1 follower.

  • Expert
  • 60 Answers

Counter clockwise

Posted on Mar 04, 2011


Add Your Answer


Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

2009 Cummings turbo diesel 6.7 L why does the fan cluch working when I turn on the a/c but turn it off and the fan cluch not working ????? Why..

Temperature not getting hot enough in the engine(bad thermostat), bad engine coolant sensor. Codes help.

Aug 21, 2015 | Cars & Trucks

1 Answer

2007 f350 cluch fan quit working

To remove clutch fan: 1. Remove the fan shroud. Remove the top screws & the two side screws with a socket & ratchet. 2. Remove the top radiator hose by using a screwdriver to loosen the clamps. 3. Hook the ends of the water pump pulley lock on the bolts on the outside of the water pump pulley. 4. Remove the large nut on the fan with the 1-1/16 wrench by turning counter clockwise. 5. Replace the fan by holding the nut perfectly level with the water pump post & start the nut by hand. --------------------------------------------------------------------------------------
FGtech V53

Mar 20, 2013 | Ford F-350 Cars & Trucks

1 Answer

Which direction do i have to turn the nut to unscrew my mahindra bolero fan?

Hi I have seen several scrap fan motors because one did not ask which way but just tried! You are clever by checking first
There are two ways I determine the correct way!
1) See whether there is a piece of the thread sticking out past tghe nut. See whether you can make our the threads/. The threads are slanted!
Turn the nut in the direction that will slide it along the threads in the direction that you want ot to exit!
Remember that the fan nut & direction was designed as a self tightening mechanism.
If you look at the shape of the blades, ou can figure out which way the motor have to turn to propell the wind in the correct direction. now imagine, you are holding the fan, and the bmotor is trying to turn the fan. See what way you have to oppose the motor's push. That way is tight! So turn the nut in the opposite direction.

Sep 04, 2011 | Mahindra Scorpio Cars & Trucks

1 Answer

Need to replace a cluch fan

The large nut that holds the clutch to the hub is reverse threads, act like you are tightening to actually loosen and vise a verse.

May 27, 2011 | 1993 Ford Econoline

1 Answer

Tring to figure out the size of this nut on the fan cluch???? 1999 blazer!!!

they make a special tool to remove the fan clutch.i just use a air hammer to remove it.remove it counter clockwise.

Jan 15, 2011 | 1999 Chevrolet Blazer

2 Answers

How do you get the fan blade off. i need to get that off, to get to the waterpump

On some fans their is a large nut to remove it, right by the fan. Some of these are lefthand threads.

Jan 08, 2010 | 1988 Ford Bronco II

1 Answer

Need to replace fan cluch

the radiator fan is mounted to the clutch, in other words remove the bolts / nuts that is holding the fan assembly to the water pump usually just four nuts once you pull the fan assembly the part that yo seperated from the water pump is the clutch, now remove the fan blades and mount thm on the new clutch assembly the piece which mounts tt the water ump is the fan clutch

Jul 10, 2009 | 2000 Kia Sportage

1 Answer

I like to know how to take off a cluch and motor fan and a z71

clutch and fan assembly are connected to the pump with four bolts. Have someone push down on the drivebelt so the pump pulley won't turn and break each bolt free, then remove the bolts.

Jun 23, 2009 | 1997 Chevrolet K1500

1 Answer

On a 1999 dodge ram 1500 v8 5.2 the water pump how do i get the fan n fan cluch off im smart at cars but i cant seem t get it

you need to go get a fan clutch wrench at local parts store the big looking nut on the fan clutch has to com off firts befor you remove belt it turns counter clock wise

Apr 16, 2009 | Dodge Ram 1500 Cars & Trucks

1 Answer

Water pump

I push on the belt that goes around that pulley, to tighten it up & help hold it in place while I undo nuts/bolts.

Jan 04, 2009 | 2003 Dodge Durango

Not finding what you are looking for?
1990 Ford Econoline Logo

Related Topics:

23 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts


Level 3 Expert

85239 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14866 Answers


Level 3 Expert

4372 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides