The air mix control motor is accessible from the front passenger-side floor board area. From that vantage point, look toward the heater and under. The air mix control motor is a black plastic housing with a wire connector and a rod that connects to a white plastic air mix control linkage. Disconnect the wire connector, remove the rod, and remove the screws that hold the unit into the bottom of the heater. You will need a stubby Phillips head screwdriver or a Phillips bit on a small ratchet as the clearance between the unit and the floor is not enough for a standard screw driver. There is also a small piece of dash colored plastic trim that can be removed for easier access.
6,541 views
Usually answered in minutes!
Believe it to be blend door related- are the blend door and the blend door actuator one piece? Is it likely one over the other? How do you change them?
×