Firing order is 1-3-4-2. Cylinder one is usually on the end farthest from the transmission.
1985 Pontiac Fiero 2.5 liter L4
1985 Pontiac Fiero 2.8 liter V-6
Hope this helps (remember to rate this answer).
THE BEST WAY TO DO THIS JOB IS REPLACE ONE WIRE AT A TIME, PLUG INTO PLUG FIRST AND THEN NEW DISTRIBUTOR CAP YOU CAN GET THE RIGHT PLACE BY FOLLOWING THE WIRES ON THE OLD CAP, NEVER PULL YOUR WIRES AND CAP WITHOUT A GUIDE BOOK. ONCE YOU GET ALL THE WIRES CHANGED YOU CANTAKE OFF THE OLD CAP AND JUST PULL THE ROTOR AND PUT IN THE NEW ONE. THERE IS NO ORIENTATION ON A ROTOR, ON THE DISTRIBUTOR CAP YES. AND THE DISTRIBUTOR CAP ONLY GOES ON ONE WAY.
730 views
Usually answered in minutes!
×