At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Sure! pop the trunk and remove screws and screw covers inside, then look in the wheel wells for the remaining screw/clips. Lastly underneath, near exhaust may be a few last screws to keep from flapping. Just make sure to watch for any wires from rear cameras, or reverse sensors. You will not need to remove any of the foam behind bumper.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
depending if its plastic you can remove the dent using a heat gun and a tap around the bump usually pop out. removing the bumper there are screws on the sides behind the wheel arch covers and 4 bolts around 1 foot away from the corners, if your model has sensors in the bumper they will need to be discounted. also any other wires that are they before you pull off the bumper.
forums.nicoclub.com/99-infiniti-i30-brake-lights-not-working-t599143.... Apr 13, 2015 - hi, so my rear stop lights stopped working recently. but the brake light inside the rear window above the trunk works fine. that makes me ... images for 1999 infiniti i30 wiring
there are two bolts to the center and two around the corner on at the edge up high and one at the bottom of the bumper/ Please rate my response thank you very much
×