Wheres the waterpump located on a 98 mazda protoge lx?

Drain the engine coolant into a container that holds at least 6.3 qts. by twisting the plastic drain plug on the rear of the radiator.

Unbolt the air cleaner assembly. The assembly is on the right side of the engine compartment, to the rear of the battery. A single bolt on the right side holds it in place.

Squeeze the tabs on the air intake hose clamp where the hose connects to the engine and pull the hose loose. Remove the air cleaner assembly and hose.

Remove the insulating shroud from the exhaust manifold on the front of the engine. It is held on by four bolts.

Remove the timing belt.

Unbolt the water pump from the right side of the engine block. Unbolt the flange connecting the water line to the pump. Remove the pump.

Replace the pump. Installation is the reverse of removal