Need diagram for toyota camry 2002 2.4 serpentine belt.

SOURCE: how to remove the serpentine belt of a 2004 toyota

Actually you don't have to do all of that. I just replaced one from the top. On the passenger side of the engine where the belt is, you will see the tensioner in the middle. Using a larger breaker bar with the socket that fits the bolt in the middle of the wheel, force the tensioner toward the front of the car to release pressure to remove the belt. I think it was a 15mm but can't remember for sure. I do know they are all metric sizes on that engine. The tricky part is to remember how the belt is routed. If you forget, see the diagram below. There isn't much room to work, but I'm proof that it is possible. When putting the new best on, route all pulleys and leave the alternator for last since it's right on top and easy to get to. Good luck and be patient. It's doable.

SOURCE: need belt schematic for 2006 toyota corolla

I can get you a diagram on monday but it goes from the alternator to the power steering pump then around the tensioner pulley then around the crank pulley then to the a/c compressor then pull on the tensioner to give you some slack and slip it on the waterpump.I hope that helps.Let me know if you still need the diagram

Jeffrey Turcotte

• 8991 Answers
• Posted on Nov 06, 2010

SOURCE: need toyota corolla 2002 serpentine belt diagram

I assume you have the 1.8 liter engine. If not, please get back to me.

SOURCE: need a diagram for serpentine belt

Click this link, then look at illustration 6-6.

Regards

Brian

SOURCE: how to change serpentine belt on 207 toyota camry

4 cylinder diagram
6 cylinder diagram
Loosen the tensioner pulley to remove the belt. It is the one that has a long bolt running through it. Once you remove the old belt, install the new one using the appropriate diagram from the above two links. Readjust the tension using the bolt you loosened to remove the old belt.

i hope this helps
matthew