For a 2002 Escape the hub nut is 32 mm. The torque specification is around 175 ft.-lbs.
If you don't get that very high torque correct, the next thing that will go out is your wheel bearing, because that torque secures the inner wheel bearing race to the spindle, and if it's not fully tight, the inner race will rotate and destroy itself. The correct torque spec. for that vehicle is 214 ft lbs. Seehttp://www.crsautomotiveparts.com/assets...
×
No, I'm pretty sure it is a size 30 mm for an 05 Ford Escape, FWD, V6.
Not sure
But it will be a METRIC SIZE
32 to 36 mm
Very expensive socket
4,834 views
Usually answered in minutes!
×