I need a diagram showing me how to put a serpitine belt on.

If you are trying to bypass the AC pump or you are installing the belt on a non AC equipped model you will need to get the correct belt for the models equipped without AC (it will be shorter in length)
Belt Diagram listed below:

place large ratchet on gray tensioner and pull it until tension releases from belt

CHECK TO SEE IF THERE IS A STICKER ON THE FRAME RAIL OVER THE FRONT OF THE RADIATOR, UNDER THE HOOD! MOST CARS HAVE ONE SHOWING THE DIAGRAM OF THE SERPENTINE BELT, UNDER THE HOOD SOMEWHERE

Click on the following direct Link. It has the Serpentine Belt Diagrams that you will need for your specific engine options.

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!

http://www.2carpros.com/car_repair_information/year/1991/make/plymouth/model/grand_voyager/1991_plymouth_grand_voyager_drive_belt_routing_diagram.htm

go to yahoo do a search there

if there is not a sticker under the hood, it will also have a diagram in the manual. to relieve the tension idler there is an indenttion in the front of the arm. you put a 3/8 rachet into the end and turn it to move the idler this is a spring belt tension. i have seen people pull tug and use screwdrivers trying to get them on. and never notice the rachet hole. flat to flat and groove to groove is basic, and should work. however a chevy blazer belt can be put on perfectly two different ways. but one way the belt will come out about 3/4inch too long.

There should be a diagram on the front rail ..where you hood latches....unless someone has removed it...if it has been removed ..i'll try to find the diagram for it...i hope this helps...Keith

http://www.autozone.com/autozone/repairinfo/repairguide/repairGuideContent.jsp?partName=Engine+Mechanical&pageId=0900c1528019c35b&partId=0900c1528019c35b

go here i think this will help

I dont think saab made a 2.5 engine.. re check that and lemmie know

hello two things you can do under your hood look very good ford usually has a routing diagram mounted on the top support of your radiator or off to the side it will be a pitcher of a front of a motor with pullys should show you with and without ac routing if not dont panic go to part store like auto zone get your self a haynes manuel that covers your year car the serpitine routine should be in there for your motor goodluck please rate