Question about Toyota Corolla

1 Answer

How hard is it to change a serpentine belt on a 2001 Toyota Corolla?

Posted by stoneman1968 on

Ad

1 Answer

Carl Kay

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 827 Answers

Only as difficult as you make it seem...
For reals,. if you are concerned get a haynes or chiltons repair manual at your local library or purchase from your local parts store,. call ahead to be sure it is available!! -- that should give your more confidence you will need to get'r done...
Best regards
Ck

Posted on Feb 13, 2011

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i change the serpentine belt on my 2001 corolla ce?


use a long ratched and socket, apply force clock wise and remove belt by water pump firts, note belt routing, intall new belt on all accesories leave water pump at last until compresing tentioner, it is a litle tricky good luck

Jul 05, 2012 | 2001 Toyota Corolla

1 Answer

I need diagram for toyota corolla serpentin belt


What is the engine size, and does it have air conditioning?

May 28, 2011 | 2001 Toyota Corolla

1 Answer

How to replace the serpentine belt in a toyota corolla 2002 LE.


On the Toyota Corolla has only one belt that goes around on pulley. Is a mechanism that you loose to remove the belt. is next of the body of the car on the right side where is the belt. I change the belt of my cousin Toyota Corolla 2004.

Nov 16, 2010 | Toyota Corolla Cars & Trucks

1 Answer

SERPENTINE BELT REPLACEMENT


The Belt Diagram should be on the underside of your hood, however they have a way of disappearing.

If it is not there:

Click on the following free direct Link. It has the correct Serpentine Belt Diagrams for your 2001 Toyota Corolla 1.8L (4-Cylinder) Engine and Engine Options (AC/No AC etc.). Included are Instructional and Directional Diagrams for your use.

Let me know if this helped, or if you have additional information questions. Feel Free to contact me at FixYa.com!

http://www.2carpros.com/car_repair_information/year/2001/make/toyota/model/corolla/2001_toyota_corolla_drive_belt_routing_diagram.htm "HOW TO":
Standard Rules to Removal the Serpentine Belt with an Automatic Tensioner:
1. Find the Tensioner(s). (See Diagrams on Link)
2. Using a Serpentine Belt Tensioner Tool, Or Wrench OR Ratchet, Rotate/Move the Tensioner USING THE AVAILABLE NUT (on the Pulley or Arm Base) OR the OPENING (3/8ths or 1/2 inch square opening) rotating the Tensioner Pulley/Arm - moving it away from contact with the belt and towards the area where the belt is not in contact with the Tensioner Pulley. The Tensioner is spring loaded, and is hard to rotate/move.
3. Remove the loosened belt off one of the other more easily accessed Pulleys.
4. DO NOT quickly release the Tensioner, but gently allow the Tensioner to rest in its closed position.

Standard Rules for Installing the Serpentine Belt with an Automatic Tensioner:
a. Pick a Pulley that is most easily accessed. This will usually be on top. This will be the last Pulley that the belt will go on.
b. Using the Diagram: Install the new Serpentine Belt on the remainder of the Pulleys....over, under, left right.
c. Using a Serpentine Belt Tensioner Tool or Wrench or Ratchet Tool: Rotate/Move the Tensioner Pulley/Arm "away" from Belt contact area on the Tensioner. This spring is pretty hard and with a new belt, it will be even harder to install. Rotate/Move this to as-close to the maximum allowed inorder to have enough slack in the belt to get it up and over the last pulley.
d. Using your other hand - Pull the Belt up and over the Last remaining Pulley.
e. Before releasing the pressure on the Tensioner, visually inspect the remainder Pulleys and the Belts' Positioning on them.

Feb 14, 2010 | 2001 Toyota Corolla

1 Answer

How to change serpentine belt on toyota corolla 96


96 Corolla does not have a serpentine belt it has separate accessory belts for alternator, a/c, and power steering.

Dec 01, 2009 | 2004 Toyota Corolla

1 Answer

Replaciing serpentine belt on 2006 Toyota Corolla


You'll have to remove the engine cover under the bottom so you can position the new belt on the pulleys properly. Get a wrench or tensioner tool and turn the tensioner clockwise to relax the drive belt. Don't apply excessive force.

It's hard to draw a picture with words, but looking at the engine from the passenger side of the car, there are basically two top pulleys, two middle, and two bottom. The drive belt goes around the outside of the two top and two bottom, and on the inside of the two middle.

Oct 31, 2009 | 2006 Toyota Corolla

1 Answer

Need serpentine belt diagram fo r2001 toyota


if the pulley is smoth the belts back rides on that surface if it is ribbed or lined the inside of the belt rides on that surface , you local parts store should have a diagram or dealership .

Aug 27, 2009 | 2001 Toyota Corolla

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

90 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8984 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...