Check the electrical connection at the wiper motor. Sometimes they corrode.
SOURCE: fuse box 1992 ford econoline
I have a 94 E350, and mine has 2 fuse boxes. One is under the steering column at the driver's seat, by the brake pedal. The other is under the hood, when you're facing the van it's just a little to the left and below the driver's side battery.
I have the 89-96 ford full size van chilton. I emailed scans of the fuse diagrams to [email protected]. The password is chilton. Go to asiamail.com, type in chilton for email address and chilton for password and click enter. Lem me know via that email if that was the wrong thing.
SOURCE: windshield wipers stopped working on 1998 Nissan Sentra
Water can enter and displace the grease in the wiper arm linkage ball joint where the wiper linkage attaches to the wiper motor linkage.
This can result in gradual wear over a period of time inside the joint that could lead to the separation of the wiper linkage assembly from the wiper motor linkage at the ball joint. A loss of windshield wiper function can result when this separation occurs.
To prevent grease from being washed out of the joint, the dealers will modify by adding a water diversion seal that will prevent water from entering the windshield wiper linkage ball joint area.
SOURCE: windshield wipers stopped working on 1993 jeep cherokee
Did you plug them all back in? lol j/p
Do your blinkers and your back windshield wipers work? It's either electrical or mechanical. Turn them on and poke around to see if you hear the motor doing anything. If you hear it, it's probably a broken linkage. If not, start with the fuses and work from there.
It's possible that by unplugging the battery and then plugging it back it, the fuse for the wipers received an electrical surge, blowing it. Consult your manual to see where the fuse for your model is and check to see if it's blown.
SOURCE: 1990 GMC Sierra 1500 pickup. Windshield wipers, Cruise Control
May want to look at replacing the wiper circuit board.It is located on the firewall adjacent to the wiper motor and has a some what square black cover with 3 torx screws and wireing harness pluged into the side.We had a truck that every time you washed it the wipers would stay on until it dryed out.You can try removing it and spaying it down with contact cleaner just watch the brease on the two contact tips.Well hope this helps.
1,802 views
Usually answered in minutes!
Checked fuses and relays and connection at wipermotor.
We had some ice yesterday and i thought my wipers were clear. They turned on this morning, swept up and stopped. Fuses seem ok.
ARRRGH!
I had ice as well and turned mine on they did one successful sweep then on the next trip went about half way and i heard a loud crack noise and now they will not move at all yet it still makes that cracking noise almost as if the wipers aren't moving but something (motor?) is still moving underneath them, even when the wipers are turned off. I have even shut off my car and when i turn it back on the crack noise returns shortly after. Anyone know what this could be and how to get to the underside of the windshield wipers?
windshield wiper won't work and windows won't go up or down I think its a fuse where is the fuse box and do you think its a fuse?
Fuse location for rear window windshield wiper
Hi, the windshield wipers stopped working all together, the wash, intermittence, everything. It used to work, but now nothing at all. The fuse is fine, nothing wrong there. Could it be relays?
×