Question about 1999 Mazda B-Series

1 Answer

Radio/cassette removal how do i remove the standed radio/cassette out of my 99 mazda bravo b-series?

Posted by jock01 on

  • Anonymous Dec 21, 2008

    same problem but mine is a Mazda 626

  • Anonymous Jan 27, 2009

    same problem as jock01 in a 99' B2500 bravo



1 Answer


  • Level 1:

    An expert who has achieved level 1.


    An expert that has over 10 points.


    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

I had the same problem with mine, if your model head unit has the four small holes on it (two either side) you'll need a couple of pieces of wire about 3/16 of an inch thick and about 10" long. bend the wire into a "U" shape and insert into holes, one either side, about 3/4" to an inch in. you'll have to feel around a bit but with some patience you'll get the right spot. pull the wire away from the center of the head unit and keep the pressure on as you pull it towards you. the unit should release and then you can pull it the rest of the way by hand. it should work for all head units of this type as well, regardless of make or model

Posted on Jan 27, 2009


Add Your Answer


Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How to remove the stereo on a 1996 mazda mpv

Mazda MPV Dash Trim Removal, Stereo Removal - Auto ...

? 3:38
Jul 1, 2013 - Uploaded by Robert DIY
Dash trim removal: 5 minutes. This video will show you how toremove the dash trim piece on the Mazda ...

[PDF]MAZDA 1996-UP MPV - Scosche

DIY Mazda Car Radio and Speaker Removal, How to Remove
'96-99* Car Stereo Removal · Ford Stereo Removal Tools Stereo Removal Tools. How To Install and Remove Mazda MPV Van Car Radio and Speaker, '89-95*

Jan 31, 2016 | Mazda Cars & Trucks

1 Answer

What is Max towing capacity for 99 petrol mazda bravo b2600. Can you tow 1 tonne without electric brakes?

Depends were you are, where I live any trailer with a ladened weight over 750 kgs requires brakes. Then when you do have brakes you are allowed to tow a trailer up to 1.5 times the weight of the tow vehicle.

Apr 23, 2015 | 1999 Mazda B-Series

1 Answer

What weight can a 2002 petrol bravo tow

max towing capacity is 1.8 tonnes (1800klgs)
The towed should have electric brake control as the mazda has no traction qualities on the rear end under brakes.

Feb 21, 2015 | 2002 Mazda B-Series

1 Answer

How do i put a 2044 bravo tub back on ?

What tube???????????????????????????????sorry it won't let me just this

Jul 07, 2014 | 2004 Mazda B-Series

1 Answer

What is the firing order for the Bravo b2600 2004

1988 Mazda B Series Truck 2WD 2.6 liter SOHC L4


Hope helps (remember rated and comment this).

Aug 11, 2010 | 1988 Mazda B2600 Cab Plus

1 Answer

Lost radio code on Alpine Radio Cassette for BMW 5 series

These older Alpine radios require specialist advice

Ask here for free advice

May 15, 2010 | 1986 BMW 5 Series

2 Answers

Changing gearbox oil ?

i accidently drained some of the gearbox oil from my bravo b2600 1997. where is the hole to put more fluid back in there? how much should i put? and what fluid should i use?

Dec 26, 2009 | 1999 Mazda B-Series

1 Answer

I have a 2003 mazda bravo and the headlights wont work.. I replaced the globes still no good. The parkers and hi beam work. Where is the relay??

check the ground wire of the low beam. relay is located near the switch under the dash. check if defective replace.

Dec 21, 2009 | 2003 Mazda B-Series

1 Answer

Torque settings for pressure plate and fly wheel

the flywheel is 50 -60 ft.lbs....pressure plate is 15- 25 ft. lbs..

Nov 22, 2008 | 1995 Mazda B-Series

2 Answers

Mazda bravo blowing white smoke

With regards to the above problem, I have just recently experienced the exact same thing with a 98 Mazda Bravo b2500 (this is a diesel).The symptoms were after driving over some corrugated dirt roads the vehicle would not rev over 2000 rpm and at that point would blow heaps of white smoke and misfire, but would idle beautifully and rev smoothly up to the 2000 rpm. Also noticed when vehicle was cold it would drive good for about 5-10 mins then symptoms would start again.

Fuel filters were changed, sediment trap cleaned,different fuel tried and checked all lines and system for air entry, problem still persisted. While checking injector pump lift pump pressure I noticed that the pressure would drop right off at the 2000 rpm, maybe a lift pump problem?? After consulting the workshop manual I found there is a small stainless steel thimble filter under the injector pump fuel line input union bolt, held in place with a small spring. Pulled this out to have a look and it was full of crud, cleaned it all up and put back together and have a guess what......goes like a brand new truck!!


May 26, 2008 | 2007 Mazda B Series

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

289 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts


Level 3 Expert

85239 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8984 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides