Question about 2002 Lincoln LS

1 Answer

How to reset anti theft system - 2002 Lincoln LS

Posted by acidburnover on

Ad

1 Answer

Anonymous

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    New Friend:

    An expert that has 1 follower.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 22 Answers

KEYLESS ENTRY SYSTEM You can use the keyless entry keypad to:• lock or unlock the doors without using a key.• open the trunk.• recall memory seat/mirrors/steering column/adjustable pedals positions1 or 2. The keypad can be operated with the factory set 5-digit entry code; this code is located on the owner's wallet card in the glove box, is marked on the computer module, and is available from your authorized dealer. You can also create your own 5-digit personal entry code. When pressing the controls on the keypad, press the middle of the controls to ensure a good activation. Programming a personal entry code. To create your own personal entry code: 1. Enter the factory set code. 2. Within five seconds press the 1 • 2 on the keypad. Note: The lock motors will cycle, locked then unlocked 3. Enter your personal 5-digit code. Each number must be entered within five seconds of each other. 4. Enter a sixth digit to indicate which personality feature should be recalled by the personal code. Note: The lock motors will cycle, locked then unlocked. • 1 • 2 recalls driver personality 1. • 3 • 4 recalls driver personality 2. • 9 • 0 does not recall a driver personality. Wait 5 seconds without pressing a keypad button in order to store a personal entry code. Tips: • Do not set a code that uses five of the same number. • Do not use five numbers in sequential order. • The factory set code will work even if you have set your own personal code. • If you set a personal code and store it over an existing personal code it will erase that personal code only. Erasing personal code 1. Enter the factory set 5-digit code. 2. Press and hold the 1 • 2 for two seconds and release; this must be done within five seconds of completing step 1. 3. Press and hold the 1 • 2 for two seconds to erase the customer programmed code; this must be done within five seconds of completing step 2. Your personal code is now erased and only the factory set 5-digit code will work.

Posted on Feb 09, 2011

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

I replaced the ignition on my 2007 Honda Civic and use the old immobilizer to by pass and the still won't start

After the weather gets cold, the vehicle is extremely prone to problems that are difficult to start or fail to start. Such problems will occur mainly because of excessive carbon deposits in the engine of the vehicle or the aging of the battery on the vehicle. If you are in a hurry to use the Civic, you can take out a wrench and tap the fuel tank with external force to make the internal oil pump vibrate; generally, it can be started smoothly after four or five taps.
0helpful
1answer

How do I reset the anti theft on the car?

this will sound odd, but I was having the same issue, and I tried everything on this forum but I wasn't getting anywhere, but I decided to check all my fuses under the dash and found out on my 2010 Ford E350 fuse #54 fuel pump relay coil, was blown, I replaced it and the van started right up, I was having all the issues of a PAT system failure, dash lights on, security light blinking, and advance track service light on.
0helpful
1answer

How reset computer 2007 lincoln towncar

Disconnect the battery for one hour then hook it up again. This might do it.
5helpful
1answer

07 ford focus anti theft light flashes all the time

If the security or anti-theft light is flashing when you attempt to start your car, and the engine does not crank or does not start, you have an anti-theft problem. The system may not be recognizing your key's key-less entry signal, or there may be a fault in the anti-theft module or wiring.
There is a reset procedure to stop this anti-theft light flashing.many a times this helps The reset procedure is as follows:-- Reset the alarm by locking and unlocking the drivers side door.Do this a couple of times and then check it will reset the factory security system . If the reset procedure does not helps then its time to get the anti-theft system checked.There is a short circuit in the anti-theft system wiring. For more detailed help on this anti-theft light blinking issues please click on the link below http://www.aa1car.com/library/troubleshoot_antitheft_system.htm
Thanks. you can rate this solution and show your appreciation.
41helpful
2answers

How to reset factory anti theft system dodge intrepid

how to reset the anti theft system for my 2006 dodge ram 1500
Not finding what you are looking for?
2002 Lincoln LS Logo

750 views

Ask a Question

Usually answered in minutes!

Top Lincoln Experts

Greg Bernett
Greg Bernett

Level 3 Expert

2993 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14874 Answers

Mike

Level 3 Expert

4377 Answers

Are you a Lincoln Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...