2000 Ford Focus Logo

Related Topics:

Posted on Jul 22, 2008

Auto power serges and losses and engine light comes on then stops.

  • tranel Aug 01, 2008

    hesitates when you let off of the excelerator a little

×

1 Answer

A

Anonymous

I had a similar issue with my 1989 Ford Taurus wagon. I replaced the throttle position sensor and the problem stopped. You should go to a mechanic or parts store and ask them to use an engine code reader to determine the exact cause of your problem.

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1helpful
1answer

2010 Dmax loss of power

Hi Alan,

Would help if you could pull that fault code out that generated the CEL to come on.

Anyway, I would start by checking out the turbo, MAF sensor and catalic converter are common problems for the 4JJ1 engine.
0helpful
1answer

Power loss with engine light

Have you checked the engine computer for trouble codes ?
0helpful
1answer

Loss of power

Guess it is time for a replacement motor. It appears that the motor has seized from lack of oil.
0helpful
1answer

I'm having same problem on my 2000 model rodeo 4wd 3.2L V6. Other day check engine light came on. I checked engine bay nothing abnormal, or power loss. Next day light was gone. 2 days later drivin

Where I live there is a Schuck's auto parts...and they have a hand held diagnostic tester that plugs right in to your harness. This will tell you whats is wrong.It only takes about 2 min and they don't charge you.On my car it was the mass air flow censor.If you can't find a Auto parts store that does this...take it to a shop soon. Good Luck
0helpful
1answer

Loss of power sometimes I have 1991 Honda civic DX, from day one. 451000km on it. Very well looked after. runs fine, but some time loss of power and do not want to go over 50-60km, until unless the...

Even the best kept vehicle can have an EGR problem. Makes no difference what else you do to it to TRY to make it run better, until you replace the Exhaust Gases Recirculation valve, you'll always have the problem. Replace the EGR, no more problem.
0helpful
1answer

Engine system light has come on but with no loss of power and no engine management light came on

There is many sensors in your car that can trigger fault in Ecu. Try to drive to auto zone for free check up
0helpful
2answers

Engine light on intermitting power loss

Take it to Advance auto or Auto zone, let them connect a scanner, (free of charge) , they can read the codes & most cases tell you what part or system is failing.
0helpful
1answer

Oil light goes on and off and engine has a knocking sound.

This sounds like severe engine damage, do to loss of internal lubrication (no oil). That's the bad thing about 'idiot' warning lights, they come on when u have a severe problem, and the damage is done. You are going to probably have to purchase a used engine from an auto salvage yard, or purchase a re -manufactured engine. Sorry for the bad news, this is about as bad as it gets.
Not finding what you are looking for?

109 views

Ask a Question

Usually answered in minutes!

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...