Heater only blows cold air but hoses are hot
appears we have an Air lock scenario and you will need to perform a
the vehicle on level ground, when cold remove coolant filler cap,
start engine and leave to idle, turn heater on full and blower to
max. When engine reaches operating temperature watch and listen near
coolant filler, keep clear as gurgling and hopefully a boil over
should occur. Top up with very warm coolant and wait as it may do it
for heat inside vehicle if warm replace coolant cap but keep an eye
on temperature gauge as the ~Air lock may have moved on from heater
matrix/core so proceedure needs to be carried out again from COLD.
persistent boil ups/over attention must made in the cylinder head
gasket area, or possibly water pump?
press the Blue button to appraise my FREE Efforts, Thank You!
Feb 28, 2009 |
1996 Mercury Grand Marquis