Question about 2003 GMC Sierra

1 Answer

I have a 2000 sierra 3500 dually dump truck and the brakes go to the floor. but have no leaks

Posted by eddiepeavler on


1 Answer

Duane Wong

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • GMC Master
  • 6,826 Answers

If the brake pedal goes to the floor and there are no external leaks, then the master cylinder may need to be bled.

Posted on Feb 08, 2011


Add Your Answer


Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How do I remove brake drum on 2000 GMC Dually

Open up the hood, remove the headlight covers then remove the cross mounting thing to the grill. Then gently push bottom of the grill down and out. Then the grill should basically just pop out. --------------------------------------------------------------------
Truck & Heavy Duty Diagnostic tool

Dec 04, 2012 | 2000 GMC Sierra 3500

2 Answers

I have a 1999 gmc 3500 crew dually with a 454 engine in it. This week it started running rough and idling funnny. Could this be the fuel filter or something else?

The fuel filter may need to be replaced, but wont fix the problem you have. Its just a maintenance item that should be done every 15k miles anyhow. Check it over, check the large hose between the air filter and the engine make sure its secure. see if all hoses are ok, if you see/hear a vacuum leak. If all looks ok, time to have it checked by a shop.

Sep 01, 2011 | 1999 GMC Sierra 3500

2 Answers

Replace bearing and hub, it drove for a day then the break light and abs light came back on. the breaks are still working fine. 2000 dodge ram 3500 4x4 diesel dually pickup

Possible when the HUB was changed that the sensor connection was damaged or was not taken care off . So please recheck with your work and the fault will be seen.

Jul 01, 2011 | Dodge Ram 3500 Cars & Trucks

1 Answer

83 Ford F350diesel dually truck brake problems

you must have a leak in your brakes! check your brake fluid! They may work for now but after all your brake fluid is pushed out they wont work. You better take a look underneath and get someone to press on the brakes to see where it is leaking out. You can keep toping up the brake fluid and that might get you by for a while.

Dec 28, 2009 | 1982 Ford F 350

1 Answer

2001 chevy 3500 dually - I need to adjust the e brake.

To adust follow the cable from the drum to the Y on the Y there is two nuts back off the lock nut then turn other nut clockwise to tighen cable be careful not to get to tight or the brakes will lck up and make sure you goe enough brake pedal before doing so.

Aug 17, 2009 | 2000 Chevrolet 3500

1 Answer

I need a rear brake diagram for a 89 chevy 3500 4x4

Try this website :- I used it to fit a parking brake to our 1999 sierra that had them missing

Aug 04, 2009 | 1994 Chevrolet K2500

1 Answer

I cannot get the front rotors off my 2000 chevy 4x4 3500 dually. I have taken off the caliper brakes and the axle nut and have hit the rotor with a 5 lb hammer. but it dosent move . is there something i...

If the calipers are off the rotors should be cleared for take off. haha a little airplane humor. I have had issues like this because of brake dust and rust. Sometime it takes several rotations of the rotor where your hitting it to keep loosening the ****.

Apr 16, 2009 | 2000 Chevrolet 3500

Not finding what you are looking for?
2003 GMC Sierra Logo

Related Topics:


Ask a Question

Usually answered in minutes!

Top GMC Experts

Ryan Lutton
Ryan Lutton

Level 3 Expert

1266 Answers

john h

Level 3 Expert

23883 Answers


Level 3 Expert

4376 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides