Question about 1997 Chevrolet Blazer

2 Answers

1997 blazer 4.3 4x4 change the filter could'nt get the old sleeve out so i used it now my blazer is not shifting gears .could that me my problem or did i hit something when i was trying to take the pan off please help the engine light codes read that all three shift solenoid where bad

Posted by jose25376 on

Ad

2 Answers

Anonymous

Sounds like the filter is not on,or up
in the o-ring, you didn't change

Posted on Feb 08, 2011

Ad

Marc Helfrich

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    New Friend:

    An expert that has 1 follower.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 56 Answers

The first and easiest thing to check on your 97 blazer is the trans fluid. Did you make sure you added new fluid when you dropped the pan and replaced the filter.(assuming this from problem discription) May need to drop trans pan again and make sure filter didn't fall off into bottom of pan.(from "old sleeve"you didn't replace) I would start the vehicle, and run till normal operating temp and check fluid and go from there. Good luck, best regards.

Posted on Feb 10, 2011

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 1997 gmc diesel box truck. Retired USPS vehicle. The last couple days is has struggled in shifting, and today is wouldn't shift up past second gear. The fluid looks like it is full. What...


i had an old gmc diesel van,it would not like changing gears, thought maybe tranny trouble, & i changed the fuel filter,problem solved, turns out it wasnt getting enough fuel to change gears.maybe your fuel filter needs to be changed

Apr 08, 2011 | 1997 GMC Yukon

1 Answer

1997 cheby blazer lt v6 4x4 when shifting from first gear to second gear, there is a jum. is this a problem or is the automatic transmission just shifting on first to second gear?


sounds like a sticky sol. for second gear or first gear this is a com. prop you can try what the dealers whould do is use there trans tretm. 3 pack solutoin and follow dir. this would fix a lot of trans when i worked in the dealer

Jan 18, 2011 | 1997 Chevrolet Blazer

4 Answers

96 chevy blazer 3rd gear and overdrive slipping


i got a 1996 chev. blazer s-s10 4.3 engine 4x4.problem i got is i got 1st 2nd & overdrive & reverse but no 3rd gear what should i do

Jun 30, 2009 | 1996 Chevrolet Blazer

1 Answer

1997 chev. blazer


If it shifts from 1st to 3rd gear also, then you need to have it rebuilt.
I lost reverse and 2nd gear in mine and I had it rebuilt.
Works great now and for the low price of only $1600,,,LOL

Jan 26, 2009 | 1997 Chevrolet Blazer

3 Answers

1997 Chevy blazer not shifting


This sounds like a wiring issue, check and make sure the transmission connector is ok, no broken locks on hard shell or bent pins.

Oct 27, 2008 | 1997 Chevrolet Blazer

1 Answer

1997 Blazer 4wd auto transmission


IT IS POSSIBLE THE FILTER CAME OFF and allowing it to **** air

Oct 06, 2008 | 1997 Chevrolet Blazer

Not finding what you are looking for?
1997 Chevrolet Blazer Logo

175 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8984 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...