Question about 1999 Hyundai Accent

1 Answer

Tail lights on my 99 hyundai went out changed bulbs and fuses but still nothing. now what should i do?

Posted by jeffro12g on

Ad

1 Answer

Chuck Sturgill

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 192 Answers

Check your ground wires going from the tail lights to the chassis. Make sure the wires and connections are good.

Posted on Jan 28, 2011

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2001 Hyundai Tiburon, the drivers tail light will go out/on if I hit a bump 2 mechanics have changed the bulb checked the fuse and wiring and can not figure it out. Anyone had this issue?


Corrosion of the bulb socket that holds the bulb in place. Try cleaning out any corrosion and use dielectric grease in the bulb socket. Do not use any other type of grease. If this does not work, you will have to buy new bulb sockets.

Aug 17, 2015 | 2001 Hyundai Tiburon

1 Answer

How to replace, step by step, the rear brake light bulb on hyundai atos 1999?


How Do You Change Tail Light Bulb
Remove the wiring harness from the tail light lens assembly. Disconnect tail light bulb from the wiring harness socket. Reconnect the wiring harness to the tail light lens assembly. To confirm proper installation of the new tail light bulb, place the key in the on position.
IT IS VERY SIMPLE OR GO TO AUTOZONE AND HAVE THEM CHANGE IT OUT FOR YOU AND WATCH THEM ONCE. GOOD LUCK.

Jul 01, 2015 | Hyundai Cars & Trucks

1 Answer

My brake lights work but my tail lights and reverse lights don't work. Also my dash lights quit when I changed the switch for my headlights.


Check your fuses. I had the same problem with a 90 Honda civic. Dash lights went out, tail lights also went out. Replaced 1 fuse and all came back on.

Jan 11, 2013 | 1996 Dodge Neon

1 Answer

Everything works but my tail light, my break light works and so does the head lights


change the bulb the are two fillaments in the bulb one for the brake lite and one for the tail lite

Jan 22, 2012 | 2000 Hyundai Elantra

1 Answer

Need diagram, showing which fuse needed on Ford Ranger XLT 1988


REPLACE THE BULBS BECAUSE THE BULBS HAVE 2 ELEMENTS IN SIDE THEM ONE ELEMENT CONTROLS THE BRAKE LIGHTS THE OTHER DOES THE TAIL LIGHTS

May 13, 2010 | 1988 Ford Ranger

2 Answers

2002 Isuzu axiom cluster lights and tail lights out


Don't try a higher fuse , it just makes things worse by adding extra burn to the problem.. First make a test lamp with a 21w bulb ( indicator size) .You now have a bulb with two wires attached , insert the "test bulb" across where the fuse should be.
When you switch on the circuit concerned it will glow BRIGHT as it is getting a POS (+) and a NEG (-) ie blowing the fuse (short circuit) in the fuse box and therefore a BRIGHT bulb.
As you disconnect and eliminate or disturb the problem the bulb will immediately glow DULL ( in series contact now) and no longer a short circuit . As you check the circuits the illumination will change and, your on the money ! Let's know how you get on , Good luck

Mar 05, 2010 | 2002 Isuzu Axiom

1 Answer

What started this mess? tailights, fog lights, brake lights....


The relay has nothing to do with the tail lights, but replacing the switch sounds like a good idea. There's a nut holding it in place, see http://www.skandix.de/en/spare-parts/electrics/switches/switch-headlight/1027524/ to get an idea of the construction. And the price. This is not worth fiddling about unreliable workarounds...
In addition, if fuses 15 and/or 16 burn frequently there might be a problem with the tail light cabling.

Good luck
Ingo

Feb 28, 2017 | 1987 Volvo 240

1 Answer

Breeze's brake light went out. changed bulb, now whole tail light won't work.


sounds like you put the wrong bulb in, that will make it blink fast. re check

Apr 18, 2009 | Plymouth Breeze Cars & Trucks

1 Answer

99 mercury mystide had rear running light broken


If the driver's side tail light is working, it's not a fuse. Use a test light to check for power at the bulb holder. One terminal will be for tail light, the other for brake/turn light. If the is constant power for tail light, replace bulb. If no power, trace wiring from bulb holder to driver's side junction. Probable broken wire between the two tail lights.

Jan 16, 2009 | 1999 Mercury Mystique

Not finding what you are looking for?
1999 Hyundai Accent Logo

109 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8984 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...