Question about Ford Ranger

1 Answer

Hello, my 1993 ranger's turn signals just quit working. the emergency flashers still work but the turn signals wont flash, make any noise, or register on the dash. all the fuses are good, but i don't know where the relay is. also before they went out they flashed very slowly, i don't know if thats related or not. thanks for your your time and i appreciate any help or advice you can give me.

Posted by m_shippey on

Ad

1 Answer

Dan Burke

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    New Friend:

    An expert that has 1 follower.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 29 Answers

Do they just turn on solid? If that is the the case, it needs a flasher relay. It is located up under the dash on the drivers side. If you purchase one at an auto parts store, you should be able to find it pretty easy. If they don't turn on at all, I would make sure the turn signal switch is plugged in all the way, and or doesn't have any pulled or broken wires going to it. Could be the turn signal switch its self.

Posted on Aug 15, 2017

Ad

5 Related Answers

Benimur

Louie Role

  • 6966 Answers

SOURCE: 1991 Ford E150 turn signals do not work,emergancy flashers flash constantlly unless the flasher relay is unplugged from fuse block

Hi,

If I understand you right based on your post/description, the signal lights would still turn on even if any or both of the flasher relays are removed. Should this be the case, then the signal lights are not getting the power from the flasher relays but from the brake light circuit.

Perhaps your concern is not with any of the flasher, but simply missing or loose ground more particularly with the rear lights. Perhaps you could try determining which of the wires for the brake lights and signal lights (as they come out of the light assembly) would be ground . A test and even possibly a temporary workaround is to hard wire a second ground connection from the determined ground wire of the lights and attach it to any conveniently located bolt or screw to the body. it may be to your advantage to do this on all the rear lights assembly.

Hope this be of initial help/idea. Pls post back how things turned up or should you need additional information.

Good luck and kind regards. Thank you for using FixYa.

Posted on Aug 05, 2008

Ad

Anonymous

  • 1 Answer

SOURCE: turn signal, horn and emerg flasher

replace speaker fuse

Posted on Sep 13, 2008

Mike Moffitt

  • 24 Answers

SOURCE: no turn signals but flashers work

You may have two relays one for hazards and one for turn indicators.

Posted on May 31, 2009

michigan man

edgar walker

  • 3533 Answers

SOURCE: need fuse diagram for 1996 ford ranger 2wd regular

if you do not have an owner manual for your truck try this website to see if you can download one its www.edmunds.com if all fails stop by your local ford dealer and stop in the parts department and ask if they can download one for you.

Posted on Sep 10, 2009

Gozer

Mike Raatz

  • 435 Answers

SOURCE: 1993 ford ranger

The Fuel System relay is located in far right side of the passenger side footwell just above the floor carpet.

Posted on Nov 21, 2010

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Trouble shoot turn signals 1994 Ford Ranger 2.3 engine


Diane, There are 2 separate flashers on your vehicle, one is for the emergency/4 way lights and one flasher is for the signal lights. It may be worth the couple bucks and replacing the signal flasher as a first step. Recheck bulbs/sockets, fuses/relays, flasher. If all looks good possible signal switch is bad. Remove switch and try to clean contacts or replace switch. Check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
https://ca.answers.yahoo.com/question/index?qid=20090405174036AARb2Uc
1994 Ford Ranger Turn Signal Electrical Problem 1994 Ford Ranger
93 Ranger Turn Signal Problem Ford Truck Enthusiasts Forums

Aug 20, 2016 | 1994 Ford Ranger Supercab

1 Answer

I have no signal lights, left or right, on my 2000 Oldsmobile Intrigue. I was having a problem with a front bulb not contacting properly making the right signal flash rapidly. I left it flashing while


Check if your emergency flashers still work. You possibly need a new flasher. Some cars have separate flashers for turn signals and emergency flashers, but some they are both together. If your emergency flashers still operate leave them on and find the flasher (follow the clicking noise the flasher makes) and see if there is another flasher right next to it. swap with the emergency flasher and see if your turn signals work again. If so, replace the faulty flasher.

Jul 26, 2014 | 2000 Oldsmobile Intrigue

2 Answers

Turn signal will eluminate but not flash. emergancy lights work and flash fine. Have replaced the flasher and turn signal switch.


You know you have 2 flashers right, one for emergency flashers and one for signal lights? Does it refuse to flash on both sides, right and left? Have you checked all bulbs front and back are good?

Jan 27, 2013 | 1993 Plymouth Sundance

1 Answer

Blinkers wont work.all my lights turn on flashers work just no turn signals only front side markers what can it be?


This vehicle should have 2 flasher relays one that operates the emergency flashers and one operating the turn signals.Easiest way to locate these would be to turn the emergency flashers on and listen to where the clicking is coming from usually the flasher are pretty close to each other.Once you find the flasher unit you can swap the flasher unit that is working with the one that is not and if the turn signals work after that you will need to purchase another flasher relay.

May 27, 2010 | 1993 Buick LeSabre

1 Answer

Turn Signals quit working


Sounds like the turn signal flasher is going bad. The easy way to find wher the flasher is hidden is turn the turn signal on and find the clicking, that is the flasher. The emergency flashers work fine because they use a different flasher.

May 05, 2010 | 2000 Audi TT

1 Answer

Emergency flashers remain constant ON when the brakes are applied


It is as intended. If you check with everyone else, their car does exactly the same thing!!

Oct 09, 2009 | 1987 Ford Ranger

2 Answers

No turn signals but flashers work


There a two modules 1 for the turn signals and 1 for the flashers. Look under your dash around the steering wheel and fuse box area for one that is in the wiring harness.

May 31, 2009 | 1991 Ford Ranger Supercab

2 Answers

1993 ford ranger supercab


the fuse box is inside the pickup under the drivers side dash, there is a flasher which is the round one in the fuse box, it controls turn signals and emergency flashers also in the same fuse box, there is a 15 amp fuse which controls just the turn signals it sits vertical instead of horizontal.

Jun 10, 2008 | 1993 Ford Ranger SuperCab

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

67 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

gerry bissi

Level 3 Expert

4388 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...