I have a 1998 Camry LE and I broke off the housing on the passanger side mirror, and yesterday I bought a new mirror, on the original mirror it wasnt heated, and the guy who i bought the new mirror said the heated one would connect with the original wiring yet I'm looking at it and there is no connector in the original wiring the only connections are inside the door panel and on the very end of the old mirror and it wont fit in the new one. Is there a wire I can buy that would fit in the new heated mirror or do I have to find a new mirror that isnt heated?
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
most likely a defect. call the dealer and see if toyota has issued a recall on the visor and you might have it replaced for free. other than that, there's always the junkyard.
Just remove the plastic triangular cover that is on the door. There may be a speaker behind it that will also have to be removed. Once these are off just unplug the little white wiring harness and remove the three 10mm nuts that secure the mirror housing to the door.
when you are tightening up the new mirror be sure not to over tighten as you could break the new part.
no you can buy either heated or non hated mirrors and be ok either way. once you put the new one in place you will need to make sure you hook the controls up so you can control it from the dash
×