At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
On a 1997 Dodge Ram Van, the relays that are located on the firewall are likely to include:
Fuel pump relay
Headlight relay
Horn relay
AC compressor relay
Engine control relay
Automatic shut down relay (ASD)
These relays are responsible for controlling various electrical components on the van, such as the fuel pump, headlight, horn, and AC compressor. The specific location of these relays on the firewall may vary depending on the model and trim of the van.
If you are having an issue with one of the relays on the firewall of your 1997 Dodge Ram Van, it is recommended to consult the service manual or a mechanic to determine which relay is causing the problem and how to fix it.
You need to check the blue wire w/red trace at the light switch. Also at the dimmer. Those vechs. Had history of the dimmer having issues. If thats where the problem is it can be bypAssed.
get as new relay swich box and it should be ok if it dose not work check the steering indicator is not broken of inside the switch on the indicator arm
Check the headlight relays under the hood . In the little fuse box near the fender inside the hood. Tap the relay. sometimes they tend to stick open or closed. If not replace them.
hi, the problem you are having is going to be with the indicater relay the problem is their are a few of these relays so you would need a manual to find out witch one it is, or you can put the indicaters on and just gently touch the top of each relay until you feel the slight click then this is the one that needs replacing
×