2002 superduty 4x4 v10 supercab. my airbag light came on and has stayed on, its not flashing. the passenger side airbag on/off switch light is working normally. recently had a cb radio power lead wired into lighter wire harness could this have tripped the airbag warning light somehow?
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
You have a code 25 which is a side curtain air bag passenger side. Most likely the connection disconnect the airbag and reconnect it. First disconnect the battery
If this is for a truck, it has something to do with the indicator lamp for the passenger side airbag. You would need the diagnostic test for that code to fix the problem.
Since there was a sudden **** to the driveline then this caused a suden jolt in the frame which caused the impact sensor to think you were in a collision.
You have a fault in your airbag system. Therefore, you have no airbags at this time. The blinking then pause, then blinking again is giving a code to tell what the fault is.
My 1994 F-150 doesn't have a passenger side airbag, and if the 1995 Ranger does have passenger airbags, it would not have a way to disable the passenger airbag until later models (after a bunch of kids got hurt by the airbags deploying). If I recall correctly that wasn't added until somewhere between 1999 and 2001.
×