At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Help our Honda Passport 2000 LX 4wd the light on the dashboard clock is off. Do I need to replace a bulb or fuse to get clock light to work? I can not find any information in the owners manual.
Re: Help our Honda Passport 2000 LX 4wd the light on the...
If all other dash lights work you will have to replace clock unit check to see if a bulb is available if so replace it but most clocks wont have a bulb that can be replaced check parts dept at dealer
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Check engine light must come on with all other lights. It's called a bulb check. So either the bulb has burned out or the previous owner disconnected it.
The first thing to do is check all the fuses in the related systems to see if any are blown, replace as needed, if that cures the problem but the fuse blows again you will need to see the local Honda dealer (or your own Honda repair facility) for further diagnostics of the electrical system. Please do not replace any parts unless you have performed the proper diagnostics as outlined in the factory service and repair manual.
use a eyeglass flat screww driver to pry the clock assembly up and out , disconnect the clock assembly and remove the bulb by twisting the the blue or sometimes grey round plastic bulb bottom to remove it from the assembly. install new bulb , twist clockwise to lock in place , reinstall assembly
There is a buln in the back of the clock. If you remove the clock, it pulls right out, you can get a new (tiny!) bulb from the dealer. If you smack the clock it will probably come back on. These are very common.
you will have to check yur fuses and if you find the dud one replace it. your manual will show the fuse array.if not the fuse remove the clocks and the bulb holders are all on the back and replace with new ones the same
On the side of your transmission will be a switch with several wires
coming out of it. This is your reverse switch that turns on your
reverse lights and most likely needs to be replaced
×