If you have ABS then the wheel bears are not replaceable, and the entire hub needs to be replaced as a unit. The OEM part # is 4340250G11
If you do not have ABS then they are replaceable. The inner bearing is part # 0926225061, and the outer bearing is part # 0926220069.
The rear wheel bearings are pressed in the brake drum with a spacer in between.
Remove the rear brake drum and place it on a work surface.
Tap out the opposite side with a screwdriver/punch and a hammer. (i.e. tap out the inner bearing when the outside of the brake drum is facing you, and tap out the outer bearing when the inside/brae shoe side of the drum is facing you)
Tap in the new bearings making sure that the sealed sides are facing out.
Rear hub and bearing
Click to Enlarge
To install:
Rear hub and bearing
Click to Enlarge
Rear hub removal
Inner wheel bearing removal-rear hub/bearing
Rear wheel bearing removal-2wd
Rear wheel bearing removal-4wd
To install:
Install or connect the following:
Rear wheel bearing installation
hope this helps if so send testimonial comment or even any other questions you have
946 views
Usually answered in minutes!
×