At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
It is tricky someone tells use headrest as a live device to save live under water ??? and you don't know how to remove. Look near seat for the pinpoint to push and relived.
remove drivers side headest
Diana, If all else fails pop into a garage and they can show the procedure. Check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
the 1990 taurus did not have a dual cam. the only motor was a 3.0 or a 3.8. the dual cam was first in 1998 . you will need to remove the power steering brachet and pump
90% of head rests just pull out. the others will have a button where the headrest goes into the seat. If yours doesn't have the button, then push the headrest down and **** it up with some force and it will come out. Just be carefull you don't hit yourself in the face with it. Been there done that
1.Lift headrest and headrest support bars trim all the way up. 2.Insert tongue depressor (or slim jim) down the front side of the headrest bar.Push depressor down as far as possible.When the depressor is beneath the headrest trim piece, push headrest all of the way down. 3. Lift headrest to remove.
I've removed the headrest on my mustang before. Some seats have a zipper or a way to snap the seat cover at the bottom rear. If you open it you can put your arm up the back of the seat. With the headresat down you can feel the locking piece that retracts when you lift the headrest. If you take a long shaft flat blade screwdriver and place it in between and lift up the headrest it will slide out. Yes, getting the screwdriver in place can be tricky but, it was the only way to remove the headrest without having the correct tool. I hope this can work on your vehicle as well.
HI, IF I REMEMBER THEASE JUST SNAPPED IN TO REMOVE YOU HAD TO FEEL THE TWO LUGS THROUGH THE REAR OF THE SEAT AND PINCE THE LUGS IN AND LEVER OUT AT SAME TIME ,HOPE THIS HELPS THANKS.
The headrest has on obvious button to adjust the height and another button kinda hidden to remove the headrest. The black plastic ring at the base where the metal poles insert into the seat is where the two buttons. You probably noticed the obvious on that sticks out of the side of one of the rings. The other plastic ring contains a similar button that is not noticeable due to it being flush with the side of the plastic ring. Adjust the headrest to its highest position, then locate the "hidden" button on the other plastic ring and depress it while lifting on the headrest and it should come out.
×