Question about 2002 Land Rover Freelander
You have to jack it up and remove the underboady engine cover. Lower the vehcile and open the hood remove the engine cover. Use the jack to support the engine for underneath. you'll need to remove or swing the top passenger side engine mount. back off the tensioner from the belt. Auto Zone, Advanced Auto rents a tool if needed. Now you can change your belt!
Posted on Feb 26, 2013
I guess you mean auxiliary belt, as the fan is not belt driven. You may mean timing belt as well. In any case this video of changing the timing belt (auxiliary belt as well) on an mgzs with the same engine should help
Posted on Oct 26, 2015
SOURCE: land rover freelander 2002
you need a special tool is no marks, one tool is like a pin this one go on the flywheel.
for the camshaft you need a special bracket to hold both camsafts in position.
Posted on Jan 28, 2009
The fuel filter is located below the electrics box, half way between the battery and the bulkhead on the passenger side, under the bonnet. It is very difficult to see how it all fits, but it has a central screw which holds the plastic filter housing/mounting in place. Find this screw (which is a small self tapper) and be prepared to loose it, or use a magnetic screw driver. Then lift the plastic housing up and away, (towards the engine) be ready with loads of rags to catch the diesel fuel when you disconnect the pipes. There is an earth wire attached to the housing also. (anti interference, I think) It is quite a fiddle getting it back again, as it has two locating lugs on the back of the plastic housing/mounting.
Posted on May 07, 2009
Tips for a great answer:
Sep 24, 2016 | 2002 Land Rover Freelander
Dec 10, 2015 | 2002 Land Rover Freelander
May 29, 2011 | 2003 Land Rover Freelander
Mar 27, 2011 | 2002 Land Rover Freelander
Mar 26, 2011 | 2002 Land Rover Freelander
Jul 06, 2010 | 2004 Land Rover FreeLander
Oct 26, 2009 | 2002 Land Rover Freelander
Jun 10, 2009 | 2002 Land Rover Freelander
Oct 28, 2008 | 2002 Land Rover Freelander
1,528 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: