Question about 2005 Mitsubishi Lancer

2 Answers

Torque settings for 2005 lancer es fly wheel gearbox etc

Posted by davidjk199 on

Ad

2 Answers

james gentry

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 1 Answer

I have a 2003 mitsubishi lancer es. I need the clutch torque specs. Does anyone have them?

Posted on Jan 19, 2013

Ad

john nail

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,702 Answers

2.0L Evolution engine

flywheel bolts 132 =/- 5 N.m. 98 +/- 3 ft lbs.

transmission to engine bolts 48 +/- 6 N.m. 36 +/- 4 ft lbs.

2.0L Non- Evolution engine

flywheel bolts 98 +/-5 N.m. 72 +/- 3 ft lbs.

transmission to engine bolts 48 +/- 6 N.m. 36 +/- 4 ft lbs.

2.4L Ralliart engine

flywheel bolts 132 +/- 5 N.m. 98 +/- 3 ft lbs.

transmission to engine bolts 48 +/- 6 N.m. 36 +/- 4 ft lbs.

Posted on Jun 02, 2011

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Hi i have lancer model 2005 1.6 glx the car is jerking what is the problem of my car?


Check in order PCV valve, air filter, transmission fluid, oxygen sensor, EGR system.

Dec 17, 2014 | 2005 Mitsubishi Lancer 1.6

1 Answer

Installing piloet bearring in flywheel


Hi Snale, The bearing is located inthe center of the fly wheel. To gain acsess means removing the gearbox, clutch assembly and flywheel. Gain access from the back of the flywheel. Tap out the failed bearing, fit in the replacement and refit the flywheel. Make sure to torque the fly wheel bolts to the required specs. This is a major undertaking and even though the bearing is very small the job is very big. Regards John

Nov 16, 2012 | Cars & Trucks

1 Answer

How to unbolt torque converter on a 1kzte engine and to remove engine


there is a cover at the bell housing of the gearbox! remove its bolt then access the thin fly wheel! there are bolts that attach it to the torque converter! remove all as you rotate the fly wheel! pretty simple!

Jun 16, 2009 | 1996 Toyota 4Runner

1 Answer

Need torque spec for axle nut 2003 lancer


THE BIG NUT DONT TORK IT SHOULD HAVE HAD A CARTER PIN IN IT THAT KEEPS IT FROM BACKING OFF BUT U JUST SNUG IT UP TIGHT THIN TURN 1/2 TURN PUT CARTER PIN IN THE HOLE IF U TIGHTING THIS NUT REAL TIGHT THE BEARING WILL GET HOT AND LOCK UP ON U GOOD LUCK PLEASE RATE THIS

Apr 05, 2009 | 2003 Mitsubishi Lancer

1 Answer

Need to change belt that goes from fly wheel to alternator on 2003 lancer es cannot find bolt to allow alternator to swing


The bolt your looking for is there. There should be two of them one adjust the alternator and one that pivots at the bottom of the alternator

Jul 15, 2008 | 2003 Mitsubishi Lancer

Not finding what you are looking for?
2005 Mitsubishi Lancer Logo

834 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8984 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...