SOURCE: service c light is on
it's time to go to the shop.
oil service
cabin filter
air filter
probably tire rotation
tune up either check up or perform.
do not go to a cheap place it will cost you lots more.
inspection of suspension, fluids, lubrication.
probably brake fluid flush.
probably coolant flush
possibly tranny service
SOURCE: reset oil change indicator 2008 mercedes benz E350
With the key in position 1, hit the odometer reset button on the left on the cluster 3 times in a row. The cluster should beep once. scroll through the multifunction display with the page buttons until the display shows the onboard voltage screen. It will say something like "UB: 12.2 V" scroll threw this menu with with the up/down until you reach the "service menu" page. scroll down to "confirmation" press +, confirm full service with +. Wait till it says service confirmed. cycle the key off and then back on to position 2. Scroll to the normal service menu where it normally says how many days or miles till next service. If the service was reset correctly, it will say "service display not possible" for a few minutes while it recalculates. You must cycle the key off and back on before it will back out of the onboard diagnostic mode. If you dont back out, the esp/abs/bas lights will illuminate when the car is started
SOURCE: how to reset airbag for mercedes benz c220 1994
This can not be reset by conventional methods. This must be done through a scan tool. Usually only the dealer scan tool will communicate with the SRS module. If the SRS light is on you have other issues and they must be remedied before the light will go out. There is no way of knowing what the issue is without running codes with the scan tool.
SOURCE: 2005 mercedes benz 320 diesel
These instructions will work from 09/01/2003 and up 211 Model E Class Mercedes
1. Insert igntion key, switch to position "1"
2. press the page button (looks like a page in front of another page. Use the one with the writing on the rear page) on the steering wheel controls repeatedly until the mileage is displayed within the multifunction display.
3. Press the cluster illumination button 3 times in short succession. The battery voltage will be displayed.
4. Press the up or down arrow buttons until the service menu appears.
5. Use the + and - buttons to select the menu option "confirm"
6. Press the page button on the steering wheel until " complete service" is selected.
7. Confirm "Complete Service" with Page Button. The display will show "Service Confrimed"
SOURCE: How do you reset c230 2007 mercedes benz resetting
Try this, it is the procedure
for resetting the ASSIST computer on many Mercs
1...Turn Key to position No:2 in the ignition /
steering lock and immediately press AND Hold the button "000.0" (the
trip reset button) TWICE within the space of 1 (one) second.
2…Turn the key to position No: 0
in the ignition / steering lock. Then release the button.
3...Press AND Hold the button
"000.0" (the trip reset button) and turn Key to position No:2 in the
ignition / steering lock. Keep button pressed
After about 10 seconds the service
indicator will reset and an acoustic signal may briefly sound
That should do it....Good Luck…...Let
me know if it works?
3,722 views
Usually answered in minutes!
×