Question about Nissan Sentra

1 Answer

How to replace rear shock in nissan sentra 2002

Posted by nabhani75 on

Ad

1 Answer

Anonymous

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    New Friend:

    An expert that has 1 follower.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 36 Answers

WELL IT REALLY EASY I THINK THERE IS ONLY A TOTAL 3 OR 4 BOLTS AT MAX TO REMOVE THEM ..HOWEVER YOU DO NEED A SPRING COMPRESSOR TO COMPRESS THE COIL SPRING ..OTHER WISE IT COULD SHOOT OFF AND SERIOUSLY HURT YOU ..REMOVE THE TWO NUTS FROM AROUND THE UPPER STRUT MOUNT ONE BOLT AT THE BOTTOM PULL IT OUT..THAT'S IT

Posted on Dec 26, 2010

Ad

5 Related Answers

Anonymous

  • 24 Answers

SOURCE: How to replace cabin air filter nissan sentra

lOOK BEHIND THE GLOVE COMPARTMENT. Compartmet is probabily plastic and all you have to do is push in real hard to get them past dash board.

Posted on Jan 05, 2010

Ad

Anonymous

  • 1066 Answers

SOURCE: 2002 nissan sentra gxe computer

buy a used unit from the junk yard.

Posted on Mar 21, 2009

Chris Gennaria

  • 92 Answers

SOURCE: Does a 1996 Nissan Sentra have Rear Struts or Rear

shocks

Posted on Sep 30, 2009

Anonymous

  • 18 Answers

SOURCE: 2002 Nissan Sentra power won't turn off

look on the back of the intake manifold, there are 2 or 3 ground wires that bolt to the back of the manifold. they ground the park netural switch and body control module if they are not hooked up or are loose it will cause this problem

Posted on Mar 02, 2010

Anonymous

  • 47 Answers

SOURCE: my 2002 nissan sentra

u have struts i believe u need to replace the strut and the spring on the strut

Posted on Feb 21, 2011

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2002 nissan sentry xe radio wiring color code


2002 Nissan Sentra Car Stereo Radio Wiring Diagram
Car Radio Constant 12v+ Wire: Pink
Car Radio Switched 12v+ Wire: Blue
Car Radio Ground Wire: Chassis
Car Radio Illumination Wire: Red/Green
Car Stereo Dimmer Wire: Red/Yellow
Left Front Speaker Positive Wire (+): Pink
Left Front Speaker Negative Wire (-): Blue
Right Front Speaker Positive Wire (+): White
Right Front Speaker Negative Wire (-): Black
Left Rear Speaker Positive Wire (+): Light Green
Left Rear Speaker Negative Wire (-): Violet
Right Rear Speaker Positive Wire (+): Blue
Right Rear Speaker Negative Wire (-): Pink

Oct 18, 2016 | 2002 Nissan Sentra

1 Answer

2002 Nissan sentra wont start. new spark plugs, starter cranks strong, fuel is flowing, but wont turn over


have you checked the coils on each spark plug to do this take out one plug attach the plug wire back on to the plug and ground the plug to the motor and have some one crank over the motor but do not hold on to the plug or you could get a strong shock
mgsoils

Mar 04, 2015 | 2002 Nissan Sentra

1 Answer

My 2002 nissan sentra back wheel is up in the wheel well is this a spring problem or shock?


u have struts i believe u need to replace the strut and the spring on the strut

Feb 21, 2011 | 2002 Nissan Sentra

1 Answer

Does hub need replacing when replacing a wheel bearing


rdfairfield: if you are asking about the rear? Yes, that is the only way the part comes and is manufactured. It is a hub and bearing assembly..

Apr 21, 2009 | 2002 Nissan Sentra

3 Answers

How do you change rear wheel bearing on a 2004 nissan sentra


Yes it is as easy as it looks. If you had the tire off and figured out that it looks easy, you shouldn't have much problem.

Mar 21, 2009 | 2002 Nissan Sentra

1 Answer

Need to replace rear suspension for 90 senra


Yes! If ya dont have a good spring compressor, and ya take the center nut out.. It'll kill you as the spring/shock separates.. My advice is to watch one being done before attempting.. Thanks

Mar 12, 2009 | 1990 Nissan Sentra

1 Answer

Nissan Suspension noise


sounds to me like your front control arm bushings are broken. have your mechanic check the bushings in rear of the control arm. the ones that are right by the 3 bolts in the control arm in rear. those bushings brake and cause play in the whole assembly, causing a rattle. Its a black round bushing about 2 inches in diamater. its most likely all separated. common problem. Have him look at your stabilizer bar links also.

Sep 01, 2008 | 2001 Nissan Sentra

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

796 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14852 Answers

Vincent G
Vincent G

Level 3 Expert

2363 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...