Question about 2000 Hyundai Sonata

2 Answers

Abs and tcs lights on what do they stand for?

Posted by bkfaz06 on

Ad

2 Answers

dannyj73

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 7 Answers

ABS stands for anti lock brake system.
TCS stands for traction control system.

I recommend having your abs system diagnosed for faulty sensors, control module, etc. With the abs light on the traction control system is designed to disable because it utilizes the abs system to automatically help control your vehicle in loss of traction situations.

Posted on Dec 19, 2010

Ad

fiona85

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 1 Answer

Abs-lampan lyser Hyndai Sonata år 2000.

Posted on Jun 16, 2011

Ad

5 Related Answers

pal03246

Phil Lovisek

  • 726 Answers

SOURCE: TCS, SLIP and ABS lights on

Check your brake fluid first. If that is low, top it off and recheck. If its ok, than you will need one of the rear ABS sensors. You will need to plug it in and find out which side it is. That's really the only ABS issue that car has. One of the rear ABS sensors fails.

Posted on May 09, 2009

Anonymous

  • 382 Answers

SOURCE: I have a 05' Hyundai Santa Fe.The ABS light & TCS light.

dear friend-it sounds like one of the sensors(wheel)is faulty or one pne of the turnwheels came loose.

Posted on Jul 27, 2009

Anonymous

  • 148 Answers

SOURCE: 2003 Hyundai Santa Fe ABS light is on along with TCS light

you may have damaged the ABS sensor or wire to the sensor up front check the wire that runs from the inner finder well and make sure it connected to the ABS sensor on the spindle

Posted on Jul 15, 2009

stevieger

  • 184 Answers

SOURCE: reset the abs and traction contols system on my '05 hyandia elant

HAVE YOU TRIED DRIVING VEHICLE FOR A SHORT DISTANCE MOST CARS ARE LIKE THIS.

Posted on Dec 20, 2008

Shaun Plencner

  • 126 Answers

SOURCE: ABS/TCS light keeps coming on.

no that does not seem right i would take it to a autozone and have them trouble shoot the code and then take it to a dealer and have them look at it

Posted on Sep 01, 2009

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

ABS light come on when i am towing


the tcs system is detecting the weight and sway of the trailer because the load on the hitch is too much- that's the simple answer.

The ABS and TCS work together - the ABS system is what detects wheel spin and tell the TCS which diverts and/or control power.

Oct 08, 2014 | 2008 Mazda MAZDA6

1 Answer

Light abs traction control stays 1998 buick park avenue


PRE-DIAGNOSTIC INSPECTIONBefore diagnosing ABS/TCS, perform a comprehensive visual inspection of system as follows.Check ABS/TCS wiring harness connectors for looseness. Check harness routing; pay particular attention to wheel speed sensor wiring harness routing. Check fuses No. 1D, 5B and 6B in instrument panel fuse block. Check fuses No. 1 and 2 in underhood fuse block. Check brake fluid level in master cylinder reservoir. Check brake fluid level in Pressure Modulator Valve (PMV) assembly reservoir. Ensure parking brake is fully released. Ensure parking brake switch is functioning properly. Always perform ABS/TCS system functional check before using DIAGNOSTIC CODE CHARTSThe EBCM/EBTCM has self-diagnostic capability, which can detect system failures. Fault codes stored by EBCM/EBTCM can be displayed using Tech 1 scan tester. There are no provisions for flash code diagnostics.Begin ABS/TCS diagnosis with PRE-DIAGNOSTIC INSPECTION procedure. If failures are found during pre-diagnostic inspection, perform necessary repairs, and proceed with ABS/TCS FUNCTIONAL CHECK. See Fig. 5 .If no failures are found during pre-diagnostic inspection, go to ABS/TCS FUNCTIONAL CHECK. See Fig. 5 . The ABS/TCS FUNCTIONAL CHECK will either indicate ABS/TCS is functioning properly or direct technician to various diagnostic procedures such as diagnostic charts, symptom diagnosis or BRAKE warning light diagnosis.CHART D - TRACTION OFF WARNING LIGHT ON CONTINUOUSLY & NO DTC SET (BUICK WITH UH8 OR U2A INSTRUMENT CLUSTER)Circuit DescriptionWhen ignition switch is first turned to RUN position, EBTCM goes through a self-test, which lasts 2-4 seconds. During self-test, EBTCM commands TRACTION OFF indicator warning light on. Powertrain Control Module (PCM) can also command EBTCM to set a Code 75 which will illuminate TRACTION OFF indicator.Traction control switch is located either on instrument panel center trim plate or driver's front door trim panel. Switch allows driver to select traction control mode (on/off). When traction control system is turned off, TRACTION OFF warning light comes on.EBTCM monitors transaxle temperature through

Jul 12, 2014 | 1998 Buick Park Avenue

1 Answer

How to shut off abs light


TCS light will be on to notify you when it is on/off..ABS light should not stay on while driving...if this occurs, there is a problem with your ABS system

Apr 05, 2014 | 2006 Kia Magentis 2.5

1 Answer

What does the ESC light on my Hyundai entourage mean? what does the acronym even stand for?


Your owner's manual says = Electronic Stability Control. Optimum driving safety now has a name : ESC, the Electronic Stability Control. ESC recognizes critical driving conditions, such as panic reactions in dangerous situations, and stabilizes the vehicle by wheel-individual braking and engine control intervention with no needfor actuating the brake or the gas pedal. ESC adds a further function known as Active Yaw Control (AYC) to the ABS, TCS, EBD and ESC functions. Whereas the ABS/TCS function controls wheel slip during braking and acceleration and, thus, mainly intervenes in the longitudinal dynamics of the vehicle, active yaw control stabilizes the vehicle about its vertical axis. This is achieved by wheel individual brake intervention and adaptation of the momentary engine torque with no need for any action to be taken by the driver. ESC essentially consists of three assemblies : the sensors, the electronic control unit and the actuators. Of course, the stability control feature works under all driving and operating conditions. Under certain driving conditions, the ABS/TCS function can be activated simultaneously with the ESC function in response to a command by the driver. In the event of a failure of the stability control function, the basic safety function, ABS, is still maintained.

Sep 02, 2011 | 2006 Hyundai Sonata

1 Answer

Abs & TCS-off dash lights both stay on. Pushing the TCS off switch does not help. "seem" to stop fine. Emergency brake seems to be fully off, not dragging. My wife encountered a patch of ice...


Hello: If there is a problem in the ABS it will bring on the tcs light as well. To determine what is causing the problem you need to have the ABS checked with a scanner to get the code. Then trouble shoot the components that the code leads you to. Normal braking is available with the light on but TCS is not as it relies on ABS for functioning the TCS.

Mar 04, 2011 | 2008 Saturn VUE

1 Answer

What does abs and tcs stand for the indicator light stays on and needs attention is it the brakes


ABS - antilock braking system
TCS - traction control system

If the warning light is on then there is a fault in the system, usually one of the sensors on each of the wheel hubs that measure the speed of the wheel.

Mar 02, 2011 | 1999 Oldsmobile Silhouette

1 Answer

The TCS light came on and the car started jerking especially at stops. The light would go off for a while after restarting the car but the same problems would happen and the light would eventually come...


The TCS stands for Traction Control System, I believe. The TCS is controlled by inputs from the wheel speed sensors. If you have a bad sensor, then a new hub may be required to repair it.

The check engine light may be a sepawrate problem. Have the codes scanned for both the Anti lock braking sytem, TCS, and the check engine light.

Sometimes it will require a separate scanner for the TCS/ABS vs. the Check Engine light.

Good luck on this diagnosis and repair.

Jan 29, 2011 | 1996 Acura TL Series

1 Answer

1999 Oldsmobile silhouette brake light and tcs


check the abs sensors common to hit or damage the wiring or knock connection loose when doing a brake job the traction control system[tcs] is tied into the abs system

Jun 28, 2010 | 1999 Oldsmobile Silhouette

2 Answers

I am planning to buy a nissan maxima.but the seller said the ABS.TCS and slip lights are on which is making the tranny to slip a bit. is this true. 1. why would the tranny slip? 2. why also are those...


can be an expensive problem the abs and tcs module under the hood is probably going bad the tranny slipping is probably what is causing the othe lights to come on. the tcs stands for traction control system if it feels a slip in the tranny like on a gravel road or wet road it assists the vehicle into getting better traction.

Aug 27, 2009 | 2004 Nissan Maxima

1 Answer

Tcs light come on along with abs an hand break light


You most likely knocked the electric plug loose when you changed the brakes, go back and make sure they are tight.

Jul 24, 2009 | 1999 Mazda 626

Not finding what you are looking for?
2000 Hyundai Sonata Logo

1,716 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8984 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...