Question about 2000 Ford Mustang

2 Answers

2000 ford mustang code 453 and missfire cyl 5 where is the cyl

Posted by jackstand99 on

Ad

2 Answers

Arnie Burke

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ford Master
  • 6,480 Answers

A haynes manual from a parts place will show you--or chec the condition of each plug wire-if one looks bad or falls apart--probly need to get all new wires /plugs

Posted on Dec 18, 2010

Ad

Duane Wong

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ford Master
  • 6,826 Answers

2000 ford mustang code 453 and missfire cyl 5 - 0996b43f8022f406.jpg <2000 ford mustang code 453 and missfire cyl 5 - enlarge_icon.gifs/images/enlarge_icon.gif" 2000 ford mustang code 453 and missfire cyl 5 - enlarge_tooltip.gifif" class="h_mi" />enlarge_tooltip.gif

Fig. 3.8L and 4.0L Engi2000 ford mustang code 453 and missfire cyl 5 - 0996b43f8022f407.jpg4-2-5-3-6 Distributorless ignition system


0996b43f8022f407.jpg enlarge_icon.gifenlarge_tooltip.gif

Fig. 4.6L Engine Firing order: 1-3-7-2-6-5-4-8 Distributorless ignition system-One coil per cylinder


0996b43f8022f406.jpg enlarge_icon.gifenlarge_tooltip.gif

Fig. 3.8L engine Firing order: 1-4-2-5-3-6 Distributorless ignition system2000 ford mustang code 453 and missfire cyl 5 - enlarge_icon.gif /> 0996b43f80208c8c.jpg enlarge_icon.gifenlarge_tooltip.gif enlarge_icon.gifenlarge_tooltip.gif

Fig. 1999-02 4.6L engines Firing order: 1-3-7-2-6-5-4-8 Distributorless ignition system-One coil per cylinder
icn_arrow.gifBack to Top

Posted on Dec 18, 2010

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 2000 f150 throughts a code . missfire cyl 1&6 but ive replaced every thing i can think of. would a exagost leek cause it to missfire? or a cloged cat


misfires can come from faulty injectors, low fuel pressure in the manifold. timing , blocked exhaust. faulty o2 sensor, leaking inlet manifold gaskets, faulty valves (burnt) It is not always plugs and leads. Have a fault code reading done.

Apr 01, 2013 | Ford F-150 Cars & Trucks

2 Answers

P0304, p0305, and p0306 on 02 Mustang 3.8l.


The page LINK here is the best i have read on misfire diagnosis, it is protected so I can't copy it but you can go to the link.

Jun 29, 2012 | 2002 Ford Mustang

4 Answers

My check engine light come up w/ all these code P0305,P0440,P0441,P0446 what's wrong Thanks


po305 is related to missfire on #5 cylinder
po440 is related to fuel tank pressure
pO441 is for evaporator purge flow malfunction
po446 relates to vent control valve electrical circuit malfunction

missfire is seperate from the other codes
as for the other three codes replace the vent control valve solenoid located near the charcoal canister the oth3er codes can relate to a faulty solenoid

after replacing light will only go out if you clear through a scan tool or three drive cycles of over 10 min each

Jan 10, 2011 | 2000 Lexus RX 300

1 Answer

2000 Ford mustang GT 4.6 keeps eating ignition coils for cyl. # 5 & 8 every few months


That is normal
Not likely #5 & #8 all the time. Don't go by codes you get. Walk a new coil,until you find bad one

Oct 10, 2010 | 2000 Ford Mustang

1 Answer

1999 f250 5.4 cyl 5 missfire code i took to dealer they replaced computer coil plugs and boots and ran compression test cyl balalance test however it still is not fixed help


If you got a PO305 Code Replace COP Coil #5
You don't need a dealer
You will be doing a lot of them,as time goes by.

I get so frustrated with this dealer thing.
I have a Lincoln LS, that is by far the most complicated vehicle ford ever dreamed up.
I have done 2 coils this year,at $59.00 each.
Some people on this site, are up to $5000.00 at the dealer, and not had one issue repaired yet.

If the misfire is real bad ,you may have to walk the new coil from one cylinder to the next until you get the offender. In that senerio,the PO 300 Codes won't always work.

Let me know how your doing. Please do your own work. Your dealer proved to you, they can't help you.

Sep 23, 2010 | 2000 Ford F250 Super Duty Crew Cabs

1 Answer

2000 ford mustang 4.6 is coming up with code of bank 2 sensor 1 an changed plugs an 5 an 6 cyl plugs were black but no plugs were wey


ur engine is a v6, the head that has the number 1 cylinder is bank 1, so u need to go to the second head and follow the exhaust line, ull find a sensor there, probabbly has 4 cables looks a lot like a spark plug, thats ur oxygen sensor, that probabbly needs to be replaced.
hope this helps
have fun!

Oct 31, 2009 | 2000 Ford Mustang

1 Answer

Need to know what po303 code is and how to fix it?


Cyl. 3 missfire. check your plugs or the coil and boot.

Dec 20, 2008 | Ford Focus Cars & Trucks

Not finding what you are looking for?
2000 Ford Mustang Logo

573 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8984 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14850 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...